Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green SODIMM sticks side by side, 260-pin DDR4 3200 CL22 64GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 3200 CL22 SODIMM POSIFLEX ZT-3715E memory upgrade

SKU CH-983H-N8Q8R

DDR4 3200 SODIMM kit adds 64 GB across two 32 GB modules for POSIFLEX ZT-3715E terminals

  • Capacity64GB (2 x 32GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB kit doubles terminal memory capacity
  • DDR4 3200 speed matches POSIFLEX ZT-3715E specifications
  • CL22 latency and 1.2 V voltage ensure stable operation
  • 2Rx8 dual-rank Samsung Micron Hynix chips deliver enterprise reliability
  • 260-pin SODIMM form factor installs in minutes without tools

POS Terminal Memory Kit

This NEMIX RAM kit provides 64GB of DDR4 3200 memory in two 32GB SODIMM modules. It is built for the POSIFLEX ZT-3715E Haydn ZT Series point-of-sale terminal. The modules run at 1.2V with CL22 latency and use a 260-pin unbuffered non-ECC design. Major OEM chips from Samsung, Micron or Hynix are used throughout.

Compatibility and Limits

The kit suits technicians upgrading a POSIFLEX ZT-3715E terminal to its maximum supported capacity. It will not fit desktops or laptops that require DIMM form factors or registered ECC modules. Buyers needing ECC error correction or a different pin layout should look at other memory lines. The 2Rx8 organisation is fixed by the module design.

Deciding Specification

The 260-pin DDR4 SODIMM form factor is the single detail that decides fit. Only systems wired for 260-pin DDR4 SO-DIMM sockets can accept these modules. Speed, voltage and latency are secondary to the physical and electrical interface. Verify the terminal’s service manual before ordering.

Helstu kostir

  • 64 GB kit doubles terminal memory capacity
  • DDR4 3200 speed matches POSIFLEX ZT-3715E specifications
  • CL22 latency and 1.2 V voltage ensure stable operation
  • 2Rx8 dual-rank Samsung Micron Hynix chips deliver enterprise reliability
  • 260-pin SODIMM form factor installs in minutes without tools

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-328K2
Capacity64GB (2 x 32GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT

Spurningar um þessa vöru

What does 3200 MHz actually deliver inside a POSIFLEX ZT-3715E terminal?

The kit runs at DDR4 3200 (PC4-25600) with CL22 latency, providing the maximum bandwidth the terminal's memory controller supports for this capacity.

What does the PC4-25600 rating mean for everyday use?

PC4-25600 is the peak transfer rate of DDR4 3200; the terminal will operate at this speed provided the BIOS is set to the default XMP or JEDEC profile.

Will the 260-pin SODIMM modules fit the ZT-3715E motherboard?

Yes, the 260-pin DDR4 SODIMM form factor matches the two SO-DIMM slots in the POSIFLEX ZT-3715E for a direct installation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.