我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green SODIMM sticks side by side, 260-pin DDR4 3200 CL22 64GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 3200 CL22 SODIMM POSIFLEX ZT-3715E memory upgrade

SKU CH-983H-N8Q8R

DDR4 3200 SODIMM kit adds 64 GB across two 32 GB modules for POSIFLEX ZT-3715E terminals

  • Capacity64GB (2 x 32GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB kit doubles terminal memory capacity
  • DDR4 3200 speed matches POSIFLEX ZT-3715E specifications
  • CL22 latency and 1.2 V voltage ensure stable operation
  • 2Rx8 dual-rank Samsung Micron Hynix chips deliver enterprise reliability
  • 260-pin SODIMM form factor installs in minutes without tools

POS Terminal Memory Kit

This NEMIX RAM kit provides 64GB of DDR4 3200 memory in two 32GB SODIMM modules. It is built for the POSIFLEX ZT-3715E Haydn ZT Series point-of-sale terminal. The modules run at 1.2V with CL22 latency and use a 260-pin unbuffered non-ECC design. Major OEM chips from Samsung, Micron or Hynix are used throughout.

Compatibility and Limits

The kit suits technicians upgrading a POSIFLEX ZT-3715E terminal to its maximum supported capacity. It will not fit desktops or laptops that require DIMM form factors or registered ECC modules. Buyers needing ECC error correction or a different pin layout should look at other memory lines. The 2Rx8 organisation is fixed by the module design.

Deciding Specification

The 260-pin DDR4 SODIMM form factor is the single detail that decides fit. Only systems wired for 260-pin DDR4 SO-DIMM sockets can accept these modules. Speed, voltage and latency are secondary to the physical and electrical interface. Verify the terminal’s service manual before ordering.

商品特色

  • 64 GB kit doubles terminal memory capacity
  • DDR4 3200 speed matches POSIFLEX ZT-3715E specifications
  • CL22 latency and 1.2 V voltage ensure stable operation
  • 2Rx8 dual-rank Samsung Micron Hynix chips deliver enterprise reliability
  • 260-pin SODIMM form factor installs in minutes without tools

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-328K2
Capacity64GB (2 x 32GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT

商品問答

What does 3200 MHz actually deliver inside a POSIFLEX ZT-3715E terminal?

The kit runs at DDR4 3200 (PC4-25600) with CL22 latency, providing the maximum bandwidth the terminal's memory controller supports for this capacity.

What does the PC4-25600 rating mean for everyday use?

PC4-25600 is the peak transfer rate of DDR4 3200; the terminal will operate at this speed provided the BIOS is set to the default XMP or JEDEC profile.

Will the 260-pin SODIMM modules fit the ZT-3715E motherboard?

Yes, the 260-pin DDR4 SODIMM form factor matches the two SO-DIMM slots in the POSIFLEX ZT-3715E for a direct installation.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。