Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green DDR5 RDIMM sticks, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 4800 ECC RDIMM CL40 1Rx8 1.1V 288-Pin memory upgrade

SKU CH-B9Y6-G88HB

64 GB DDR5 ECC registered kit running at 4800 MT/s with CL40 latency for Supermicro servers

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity for high-density server workloads
  • DDR5 4800 speed with PC5-38400 bandwidth rating
  • ECC registered design protects data integrity under load
  • 10 V operation reduces power draw per module
  • Validated for Supermicro X13SEM-F and SYS-211E systems

Server memory kit

This 64GB kit contains four 16GB DDR5 registered DIMMs rated at 4800 MT/s with CL40 latency. It is built for Supermicro servers and workstations that require ECC error correction and registered signal buffering.

Thermals and power

Each module operates at 1.1V and has no heat spreader, relying on chassis airflow for cooling. Registered ECC designs typically draw modest power per DIMM and generate low acoustic noise in normal server workloads.

What the kit changes

The four-module population fills four DIMM slots to deliver 64GB of registered ECC capacity for data-integrity workloads. Compatibility is validated for SuperMicro SYS-211E-FRN2T, SYS-211E-FRDN2T, X13SEM-F and X13SEM-T platforms.

Helstu kostir

  • 64 GB total capacity for high-density server workloads
  • DDR5 4800 speed with PC5-38400 bandwidth rating
  • ECC registered design protects data integrity under load
  • 10 V operation reduces power draw per module
  • Validated for Supermicro X13SEM-F and SYS-211E systems

Tæknilýsing

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Spurningar um þessa vöru

How do I install the four 288-Pin DDR5 RDIMM modules into the SuperMicro SYS-211E-FRN2T, and which step is most often missed?

Power down the server, open the chassis, align each module notch with the slot key, press firmly until both retention clips click, then verify all four 16 GB sticks are recognised in the BIOS before closing the case.

What maintenance or replacement will this 64 GB ECC RDIMM kit require over its service life?

No scheduled maintenance is needed; the modules have no heat spreaders and run at 1.1 V, so only a failed stick would require replacement under the lifetime warranty.

Which limit appears first when the kit runs sustained workloads at DDR5 4800 CL40?

The registered buffer and CL40 latency set the throughput ceiling, so memory bandwidth saturates before the 1.10 V thermal envelope becomes a constraint.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.