BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277543BTC
I lager
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 4800 ECC RDIMM CL40 1Rx8 1.1V 288-Pin memory upgrade
64 GB DDR5 ECC registered kit running at 4800 MT/s with CL40 latency for Supermicro servers
- Capacity64GB (4 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity for high-density server workloads
- DDR5 4800 speed with PC5-38400 bandwidth rating
- ECC registered design protects data integrity under load
- 10 V operation reduces power draw per module
- Validated for Supermicro X13SEM-F and SYS-211E systems
Server memory kit
This 64GB kit contains four 16GB DDR5 registered DIMMs rated at 4800 MT/s with CL40 latency. It is built for Supermicro servers and workstations that require ECC error correction and registered signal buffering.
Thermals and power
Each module operates at 1.1V and has no heat spreader, relying on chassis airflow for cooling. Registered ECC designs typically draw modest power per DIMM and generate low acoustic noise in normal server workloads.
What the kit changes
The four-module population fills four DIMM slots to deliver 64GB of registered ECC capacity for data-integrity workloads. Compatibility is validated for SuperMicro SYS-211E-FRN2T, SYS-211E-FRDN2T, X13SEM-F and X13SEM-T platforms.
I korthet
- 64 GB total capacity for high-density server workloads
- DDR5 4800 speed with PC5-38400 bandwidth rating
- ECC registered design protects data integrity under load
- 10 V operation reduces power draw per module
- Validated for Supermicro X13SEM-F and SYS-211E systems
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Frågor om den här produkten
How do I install the four 288-Pin DDR5 RDIMM modules into the SuperMicro SYS-211E-FRN2T, and which step is most often missed?
Power down the server, open the chassis, align each module notch with the slot key, press firmly until both retention clips click, then verify all four 16 GB sticks are recognised in the BIOS before closing the case.
What maintenance or replacement will this 64 GB ECC RDIMM kit require over its service life?
No scheduled maintenance is needed; the modules have no heat spreaders and run at 1.1 V, so only a failed stick would require replacement under the lifetime warranty.
Which limit appears first when the kit runs sustained workloads at DDR5 4800 CL40?
The registered buffer and CL40 latency set the throughput ceiling, so memory bandwidth saturates before the 1.10 V thermal envelope becomes a constraint.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
