Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green 204-pin DDR3 SODIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3 1333 PC3-10600 1.35V 204-PIN SODIMM Kit POSIFLEX XT-5515 JIVA 15 memory upgrade

SKU CH-1Q3P-Y53FS

An 8 GB DDR3 SODIMM kit built for the POSIFLEX XT-5515 JIVA 15 terminal

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB dual-channel kit expands terminal memory capacity
  • DDR3 1333 speed matches POSIFLEX XT-5515 JIVA 15 requirements
  • 35V low-voltage modules reduce system power draw
  • 204-pin SODIMM form factor fits factory memory slots
  • Major-brand Samsung Micron Hynix chips ensure reliable operation

POSIFLEX XT-5515 JIVA 15 memory kit

This NEMIX RAM kit adds eight gigabytes of DDR3 memory to the POSIFLEX XT-5515 JIVA 15 terminal. It contains two 4 GB SODIMM modules built for point-of-sale workloads. The kit is new and tested for stability in that specific platform.

DDR3 1333 PC3-10600 1.35 V SODIMM

The modules run at 1333 MT/s with CL9 latency at 1.35 volts. They are 204-pin non-ECC unbuffered SODIMMs organised as 2Rx8. That voltage and pin count are the single specification that decides whether the kit fits the terminal.

Two-slot upgrade for the terminal

The kit occupies both SODIMM slots in the POSIFLEX unit, delivering the full 8 GB capacity in a matched pair. No heat spreader is fitted, keeping the modules low-profile for the compact chassis. The terminal must accept 1.35 V DDR3 SODIMMs for the upgrade to work.

Helstu kostir

  • 8GB dual-channel kit expands terminal memory capacity
  • DDR3 1333 speed matches POSIFLEX XT-5515 JIVA 15 requirements
  • 35V low-voltage modules reduce system power draw
  • 204-pin SODIMM form factor fits factory memory slots
  • Major-brand Samsung Micron Hynix chips ensure reliable operation

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K2
Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (2X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Spurningar um þessa vöru

Will the 1333 MHz speed run at full rate inside the POSIFLEX XT-5515 JIVA 15?

The kit is built to the PC3-10600 standard, so the POSIFLEX XT-5515 JIVA 15 will operate it at the rated 1333 MHz without downclocking.

Does the 204-pin SODIMM format match the memory slot on the POSIFLEX XT-5515 JIVA 15?

Yes, the modules use the standard 204-pin DDR3 SODIMM layout that the POSIFLEX XT-5515 JIVA 15 requires.

What voltage do the modules actually need, and is it compatible with the terminal?

The modules are specified at 1.35 V and also rated for 1.50 V, giving the POSIFLEX XT-5515 JIVA 15 full voltage compatibility.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.