Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two green 204-pin DDR3 SODIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3 1333 PC3-10600 1.35V 204-PIN SODIMM Kit POSIFLEX XT-5515 JIVA 15 memory upgrade

SKU CH-1Q3P-Y53FS

An 8 GB DDR3 SODIMM kit built for the POSIFLEX XT-5515 JIVA 15 terminal

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB dual-channel kit expands terminal memory capacity
  • DDR3 1333 speed matches POSIFLEX XT-5515 JIVA 15 requirements
  • 35V low-voltage modules reduce system power draw
  • 204-pin SODIMM form factor fits factory memory slots
  • Major-brand Samsung Micron Hynix chips ensure reliable operation

POSIFLEX XT-5515 JIVA 15 memory kit

This NEMIX RAM kit adds eight gigabytes of DDR3 memory to the POSIFLEX XT-5515 JIVA 15 terminal. It contains two 4 GB SODIMM modules built for point-of-sale workloads. The kit is new and tested for stability in that specific platform.

DDR3 1333 PC3-10600 1.35 V SODIMM

The modules run at 1333 MT/s with CL9 latency at 1.35 volts. They are 204-pin non-ECC unbuffered SODIMMs organised as 2Rx8. That voltage and pin count are the single specification that decides whether the kit fits the terminal.

Two-slot upgrade for the terminal

The kit occupies both SODIMM slots in the POSIFLEX unit, delivering the full 8 GB capacity in a matched pair. No heat spreader is fitted, keeping the modules low-profile for the compact chassis. The terminal must accept 1.35 V DDR3 SODIMMs for the upgrade to work.

I korthet

  • 8GB dual-channel kit expands terminal memory capacity
  • DDR3 1333 speed matches POSIFLEX XT-5515 JIVA 15 requirements
  • 35V low-voltage modules reduce system power draw
  • 204-pin SODIMM form factor fits factory memory slots
  • Major-brand Samsung Micron Hynix chips ensure reliable operation

Specifikationer

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K2
Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (2X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Frågor om den här produkten

Will the 1333 MHz speed run at full rate inside the POSIFLEX XT-5515 JIVA 15?

The kit is built to the PC3-10600 standard, so the POSIFLEX XT-5515 JIVA 15 will operate it at the rated 1333 MHz without downclocking.

Does the 204-pin SODIMM format match the memory slot on the POSIFLEX XT-5515 JIVA 15?

Yes, the modules use the standard 204-pin DDR3 SODIMM layout that the POSIFLEX XT-5515 JIVA 15 requires.

What voltage do the modules actually need, and is it compatible with the terminal?

The modules are specified at 1.35 V and also rated for 1.50 V, giving the POSIFLEX XT-5515 JIVA 15 full voltage compatibility.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.