Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 260-PIN SODIMM POSIFLEX ZT-3716E memory upgrade

SKU CH-EC1H-JYGVC

8 GB DDR4 SODIMM running at 3200 MHz with CL22 latency for POSIFLEX ZT-3716E terminals

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Designed for POSIFLEX ZT-3716E terminals
  • 8 GB DDR4 3200 MHz CL22 module
  • 20 V low-voltage operation reduces heat
  • 260-pin SODIMM fits laptop-style slots
  • Built with major OEM Samsung, Micron, Hynix chips

POS terminal memory upgrade

This NEMIX RAM SODIMM is built for the POSIFLEX ZT-3716E Haydn ZT series point-of-sale terminal. It adds 8GB of DDR4 3200 memory in a single 260-pin module. The part number MS25600-828K1 confirms system-specific compatibility for POS environments. It targets technicians upgrading terminal capacity.

Standard voltage and unbuffered design

The module operates at 1.20V with a CL22 latency rating and 2Rx8 rank organisation. It uses major OEM chips from Samsung, Micron or Hynix without a heat spreader. Non-ECC unbuffered architecture keeps power draw low for continuous terminal operation. No active cooling is required on the module itself.

260-pin DDR4 SODIMM form factor

This upgrade fits only slots that accept 260-pin DDR4 SODIMM modules at PC4-25600 speed. It will not work in DDR5 systems, DIMM slots or proprietary soldered memory configurations. Buyers must verify their terminal uses removable SODIMM memory before ordering. The single 8GB module occupies one slot.

Helstu kostir

  • Designed for POSIFLEX ZT-3716E terminals
  • 8 GB DDR4 3200 MHz CL22 module
  • 20 V low-voltage operation reduces heat
  • 260-pin SODIMM fits laptop-style slots
  • Built with major OEM Samsung, Micron, Hynix chips

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Spurningar um þessa vöru

How do I install this 260-pin DDR4 SODIMM into the POSIFLEX ZT-3716E?

Power off the terminal, open the memory compartment, align the module notch with the slot key, insert firmly until the side clips lock — the step often missed is not seating it fully before the clips engage.

What maintenance or replacement will this CL22 8GB module need later?

No scheduled maintenance is required; if a fault occurs the module is covered by a lifetime replacement warranty from the manufacturer.

What limit appears first on this 1.2V 2Rx8 kit during sustained POS workloads?

The CAS latency of 22 cycles at 3200 MT/s sets the response-time floor under continuous load.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.