NEMIX RAM
NEMIX RAM 8GB DDR4 3200 CL22 260-PIN SODIMM POSIFLEX ZT-3716E memory upgrade
8 GB DDR4 SODIMM running at 3200 MHz with CL22 latency for POSIFLEX ZT-3716E terminals
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- Designed for POSIFLEX ZT-3716E terminals
- 8 GB DDR4 3200 MHz CL22 module
- 20 V low-voltage operation reduces heat
- 260-pin SODIMM fits laptop-style slots
- Built with major OEM Samsung, Micron, Hynix chips
POS terminal memory upgrade
This NEMIX RAM SODIMM is built for the POSIFLEX ZT-3716E Haydn ZT series point-of-sale terminal. It adds 8GB of DDR4 3200 memory in a single 260-pin module. The part number MS25600-828K1 confirms system-specific compatibility for POS environments. It targets technicians upgrading terminal capacity.
Standard voltage and unbuffered design
The module operates at 1.20V with a CL22 latency rating and 2Rx8 rank organisation. It uses major OEM chips from Samsung, Micron or Hynix without a heat spreader. Non-ECC unbuffered architecture keeps power draw low for continuous terminal operation. No active cooling is required on the module itself.
260-pin DDR4 SODIMM form factor
This upgrade fits only slots that accept 260-pin DDR4 SODIMM modules at PC4-25600 speed. It will not work in DDR5 systems, DIMM slots or proprietary soldered memory configurations. Buyers must verify their terminal uses removable SODIMM memory before ordering. The single 8GB module occupies one slot.
Fordele
- Designed for POSIFLEX ZT-3716E terminals
- 8 GB DDR4 3200 MHz CL22 module
- 20 V low-voltage operation reduces heat
- 260-pin SODIMM fits laptop-style slots
- Built with major OEM Samsung, Micron, Hynix chips
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Spørgsmål om denne vare
How do I install this 260-pin DDR4 SODIMM into the POSIFLEX ZT-3716E?
Power off the terminal, open the memory compartment, align the module notch with the slot key, insert firmly until the side clips lock — the step often missed is not seating it fully before the clips engage.
What maintenance or replacement will this CL22 8GB module need later?
No scheduled maintenance is required; if a fault occurs the module is covered by a lifetime replacement warranty from the manufacturer.
What limit appears first on this 1.2V 2Rx8 kit during sustained POS workloads?
The CAS latency of 22 cycles at 3200 MT/s sets the response-time floor under continuous load.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 US$
0.00132719BTC
På lager
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 US$
0.000101BTC
På lager