Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board with black memory chips 288-pin DDR5 RDIMM no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM Supermicro H13SSH memory upgrade

SKU CH-TAXY-H6EAN

96GB DDR5-5600 ECC registered RDIMM validated for Supermicro H13SSH servers

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96 GB capacity for dense server workloads
  • DDR5 5600 speed with CL46 latency for responsive throughput
  • ECC and registered design corrects errors and stabilises full populations
  • 1 V operation reduces power draw per module
  • Verified fit for Supermicro H13SSH motherboard with 288-pin RDIMM slot

Compatible Supermicro H13SSH Memory

This 96GB DDR5 5600 Registered ECC RDIMM is built as an exact-match upgrade for the Supermicro H13SSH motherboard. It uses the 288-pin form factor, 2Rx4 rank structure, 1.1V operating voltage and CL46 timing that the board's memory controller expects. The module installs directly and runs at its rated PC5-44800 speed without configuration changes.

Suited for capacity-bound workloads

The registered ECC design offloads the memory controller so every slot runs fully populated while correcting single-bit errors on the fly. Builders who need non-ECC unbuffered UDIMMs or smaller capacities should look elsewhere because this part will not fit those configurations.

Deciding specification: 96GB 2Rx4 DDR5-5600

The combination of 96GB density, 2Rx4 organisation, Registered ECC operation and DDR5-5600 speed determines whether the motherboard recognises the module at full capacity. Verify the H13SSH manual for supported population rules before ordering.

Helstu kostir

  • 96 GB capacity for dense server workloads
  • DDR5 5600 speed with CL46 latency for responsive throughput
  • ECC and registered design corrects errors and stabilises full populations
  • 1 V operation reduces power draw per module
  • Verified fit for Supermicro H13SSH motherboard with 288-pin RDIMM slot

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Spurningar um þessa vöru

What motherboard must I already have for this 96GB DDR5 5600 RDIMM to work?

This module is validated for the Supermicro H13SSH motherboard. It requires the 288-pin Registered DDR5 form factor and the board's specific memory-population rules to operate at 5600 speed.

How will this 2Rx4 Registered ECC RDIMM behave if I keep other DDR5 RDIMMs already installed in the server?

The registered architecture offloads the memory controller so every populated slot runs at full capacity, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

How can I confirm the kit is running at its rated DDR5 5600 CL46 1.10V after installation?

Check the BIOS or operating-system memory report: it should show 96GB total capacity, 5600 MT/s data rate, CL46 latency, 1.10V voltage, and ECC Registered status.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.