SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 US$
0.00501811BTC
متوفر
NEMIX RAM
NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM Supermicro H13SSH memory upgrade
96GB DDR5-5600 ECC registered RDIMM validated for Supermicro H13SSH servers
- Capacity96GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 96 GB capacity for dense server workloads
- DDR5 5600 speed with CL46 latency for responsive throughput
- ECC and registered design corrects errors and stabilises full populations
- 1 V operation reduces power draw per module
- Verified fit for Supermicro H13SSH motherboard with 288-pin RDIMM slot
Compatible Supermicro H13SSH Memory
This 96GB DDR5 5600 Registered ECC RDIMM is built as an exact-match upgrade for the Supermicro H13SSH motherboard. It uses the 288-pin form factor, 2Rx4 rank structure, 1.1V operating voltage and CL46 timing that the board's memory controller expects. The module installs directly and runs at its rated PC5-44800 speed without configuration changes.
Suited for capacity-bound workloads
The registered ECC design offloads the memory controller so every slot runs fully populated while correcting single-bit errors on the fly. Builders who need non-ECC unbuffered UDIMMs or smaller capacities should look elsewhere because this part will not fit those configurations.
Deciding specification: 96GB 2Rx4 DDR5-5600
The combination of 96GB density, 2Rx4 organisation, Registered ECC operation and DDR5-5600 speed determines whether the motherboard recognises the module at full capacity. Verify the H13SSH manual for supported population rules before ordering.
أبرز المميزات
- 96 GB capacity for dense server workloads
- DDR5 5600 speed with CL46 latency for responsive throughput
- ECC and registered design corrects errors and stabilises full populations
- 1 V operation reduces power draw per module
- Verified fit for Supermicro H13SSH motherboard with 288-pin RDIMM slot
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K1 |
| Capacity | 96GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
أسئلة حول هذا المنتج
What motherboard must I already have for this 96GB DDR5 5600 RDIMM to work?
This module is validated for the Supermicro H13SSH motherboard. It requires the 288-pin Registered DDR5 form factor and the board's specific memory-population rules to operate at 5600 speed.
How will this 2Rx4 Registered ECC RDIMM behave if I keep other DDR5 RDIMMs already installed in the server?
The registered architecture offloads the memory controller so every populated slot runs at full capacity, while ECC corrects single-bit errors on the fly to prevent silent data corruption.
How can I confirm the kit is running at its rated DDR5 5600 CL46 1.10V after installation?
Check the BIOS or operating-system memory report: it should show 96GB total capacity, 5600 MT/s data rate, CL46 latency, 1.10V voltage, and ECC Registered status.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
