Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 135mm square frame cooling fan with ball bearing, two-wire power connector, no LED lighting

OEM Industries

OEM Industries ADN512UB-A90 135mm Ball Bearing Fan 12V 0.44A

SKU CH-T9SN-2B13X

135 mm ball-bearing case fan delivers 80 cfm airflow at 2500–2999 rpm with a 35–40 dBA noise level

  • ColorBlack
  • TypeFan only
  • Fan Size135mm
  • Bearing TypeBall
  • Power Connector2 Wires
  • LEDNo
  • 135 mm frame fits wide range of cases
  • Ball bearing design extends operating lifespan
  • 80 cfm airflow cools components effectively
  • 35–40 dBA noise stays unobtrusive
  • 12 V 0.44 A draws minimal power

135 mm Ball-Bearing Case Fan

The OEM Industries ADN512UB-A90 is a 135 mm cooling fan with a dual ball-bearing motor and a two-wire 12 V connection. It fits PC cases, network switches or 1U server chassis where a compact frame and reliable rotation are required. The black frame carries no LED lighting.

Sustained Airflow at 2500 – 2999 rpm

At full speed the fan moves more than 80 cfm while acoustic output stays between 35 and 40 dBA. The ball-bearing design maintains consistent rotational speed during continuous duty cycles without the wear pattern seen in sleeve alternatives. Performance remains steady across extended operating periods.

Two-Wire Power and Fixed Speed Operation

The 2-wire connector supplies 12 V at 0.44 A but provides no PWM or voltage-control signal, so the fan runs at its rated speed whenever powered. Builders needing automatic speed curves or software monitoring should note this limitation. The simple wiring suits always-on server or networking roles where constant airflow is preferred.

Helstu kostir

  • 135 mm frame fits wide range of cases
  • Ball bearing design extends operating lifespan
  • 80 cfm airflow cools components effectively
  • 35–40 dBA noise stays unobtrusive
  • 12 V 0.44 A draws minimal power

Tæknilýsing

ModelADN512UB-A90
ColorBlack
TypeFan only
Fan Size135mm
Bearing TypeBall
Power Connector2 Wires
LEDNo

Spurningar um þessa vöru

How loud is the ADN512UB-A90 when it runs at 2500-2999 rpm all day?

The fan produces 35-40 dBA at its rated speed range, which is a moderate hum suitable for a server or workstation chassis.

What power connector does the ADN512UB-A90 need to operate?

It uses a two-wire lead that plugs into a standard 12 V fan header or a compatible power supply connector.

Will the 135 mm frame and two-wire lead fit the older 1U server tray I already own?

The 13525 form factor and 12 V 0.44 A rating match many legacy 1U server mounts, so it should drop in without an adapter.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.