OEM Industries
OEM Industries ADN512UB-A90 135mm Ball Bearing Fan 12V 0.44A
135 mm ball-bearing case fan delivers 80 cfm airflow at 2500–2999 rpm with a 35–40 dBA noise level
- ColorBlack
- TypeFan only
- Fan Size135mm
- Bearing TypeBall
- Power Connector2 Wires
- LEDNo
- 135 mm frame fits wide range of cases
- Ball bearing design extends operating lifespan
- 80 cfm airflow cools components effectively
- 35–40 dBA noise stays unobtrusive
- 12 V 0.44 A draws minimal power
135 mm Ball-Bearing Case Fan
The OEM Industries ADN512UB-A90 is a 135 mm cooling fan with a dual ball-bearing motor and a two-wire 12 V connection. It fits PC cases, network switches or 1U server chassis where a compact frame and reliable rotation are required. The black frame carries no LED lighting.
Sustained Airflow at 2500 – 2999 rpm
At full speed the fan moves more than 80 cfm while acoustic output stays between 35 and 40 dBA. The ball-bearing design maintains consistent rotational speed during continuous duty cycles without the wear pattern seen in sleeve alternatives. Performance remains steady across extended operating periods.
Two-Wire Power and Fixed Speed Operation
The 2-wire connector supplies 12 V at 0.44 A but provides no PWM or voltage-control signal, so the fan runs at its rated speed whenever powered. Builders needing automatic speed curves or software monitoring should note this limitation. The simple wiring suits always-on server or networking roles where constant airflow is preferred.
Najważniejsze cechy
- 135 mm frame fits wide range of cases
- Ball bearing design extends operating lifespan
- 80 cfm airflow cools components effectively
- 35–40 dBA noise stays unobtrusive
- 12 V 0.44 A draws minimal power
Specyfikacja
| Model | ADN512UB-A90 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 135mm |
| Bearing Type | Ball |
| Power Connector | 2 Wires |
| LED | No |
Pytania dotyczące tego produktu
How loud is the ADN512UB-A90 when it runs at 2500-2999 rpm all day?
The fan produces 35-40 dBA at its rated speed range, which is a moderate hum suitable for a server or workstation chassis.
What power connector does the ADN512UB-A90 need to operate?
It uses a two-wire lead that plugs into a standard 12 V fan header or a compatible power supply connector.
Will the 135 mm frame and two-wire lead fit the older 1U server tray I already own?
The 13525 form factor and 12 V 0.44 A rating match many legacy 1U server mounts, so it should drop in without an adapter.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
Thermal Grizzly TG-MP8-120-20-30-1R Minus Pad 8 chipset cooling 120x20x3.0mm
DOCTOR METAL 3x 120mm case fan pack white with controller
- Case Fan
- Case
DOCTOR METAL 120 mm case fan 3-pack with controller
- Case Fan
- Case



