Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver aluminium M.2 SSD enclosure with USB-C cable

Orico

Orico 10Gbps M.2 NVMe/SATA SSD Enclosure Silver

SKU CH-H6A0-168CV

Aluminium M.2 enclosure with USB 3.2 Gen 2 Type-C, supports NVMe and SATA 2280 SSDs, includes dual C-to-A and C-to-C cable

  • ColorSilver
  • TypeEnclosure
  • MaterialAluminum
  • External InterfaceUSB Type C
  • HDD Count SupportedSingle SSD
  • Number of Bay1 Bay

Color Silver

Size M.2 NVMe / NGFF SSD

Model USB 3.2 Gen2 (10Gbps)

  • Theoretical read/write up to 1000 MB/s with NVMe drives via 10 Gbps USB 3.2 Gen2
  • All-aluminium body with CNC-cut fins and wrap-around cooling vest for passive heat dissipation
  • Supports M.2 2280 NVMe and SATA SSDs with M-key, B-key or B+M-key
  • Included 2-in-1 cable provides USB-C to C and USB-C to A connectors both at 10 Gbps
  • UASP and TRIM support maintains performance and SSD health during external use

10 Gbps M.2 Enclosure for NVMe and SATA

This aluminium enclosure accepts a single M.2 SSD with M-key, B-key or B+M-key connectors in the 2280 form factor. It connects to a host computer through a USB 3.2 Gen 2 Type-C port and includes a dual-headed cable that provides both USB-C-to-A and USB-C-to-C plugs for broad device compatibility.

USB 3.2 Gen 2 limits and protocol differences

The USB 3.2 Gen 2 interface tops out at 10 Gbps, so an NVMe drive can reach a theoretical 1000 MB/s while a SATA drive is capped at its native 6 Gbps link, yielding about 480 MB/s. UASP and TRIM are supported to maintain consistent throughput and drive health, but the enclosure cannot overcome the lower ceiling of the SATA protocol itself.

Aluminium construction and thermal design

The all-aluminium shell uses CNC-cut stripes to enlarge the surface area, and an internal cooling vest wraps the SSD on all sides to conduct heat away from the controller and flash. Tool-free assembly lets you swap drives quickly, and the single-bay layout keeps the unit compact for desk or travel use.

Helstu kostir

  • Theoretical read/write up to 1000 MB/s with NVMe drives via 10 Gbps USB 3.2 Gen2
  • All-aluminium body with CNC-cut fins and wrap-around cooling vest for passive heat dissipation
  • Supports M.2 2280 NVMe and SATA SSDs with M-key, B-key or B+M-key
  • Included 2-in-1 cable provides USB-C to C and USB-C to A connectors both at 10 Gbps
  • UASP and TRIM support maintains performance and SSD health during external use

Tæknilýsing

ColorSilver
TypeEnclosure
MaterialAluminum
External InterfaceUSB Type C
HDD Count SupportedSingle SSD
Number of Bay1 Bay

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Should I choose this enclosure for an NVMe drive or a SATA drive?

It supports both M.2 NVMe and SATA SSDs in the 2280 form factor, so either protocol works.

What does the 1000 MB/s figure mean when the enclosure is connected to a PC?

That is the theoretical maximum for an NVMe drive over the 10 Gbps USB link; a SATA drive will be limited to 480 MB/s.

Which USB standard does the Type-C port use and what speed does it cap at?

The port is USB 3.2 Gen 2 at 10 Gbps, and the included dual-head cable provides both USB-C-to-A and USB-C-to-C connections at that rate.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.