Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR3L ECC registered DIMMs, 240-pin, no heat spreaders

OWC

OWC 16GB (2x8GB) DDR3L 1333 PC3L-10600 CL9 2Rx4 240-pin 1.35V ECC Registered RDIMM server RAM

SKU CH-82WM-FAES8

Adds 16 GB of DDR3L ECC registered memory at 1333 MHz to compatible workstations and servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

Rank 2Rx4

  • ECC registered design protects data integrity in servers
  • Dual-channel 2 x 8 GB kit delivers 16 GB total capacity
  • DDR3L 1333 PC3L-10600 CL9 matches JEDEC-standard specifications
  • Low 1.35 V operation reduces power draw in compatible systems
  • 240-pin RDIMM form factor fits select workstations and servers

16 GB dual-channel DDR3L ECC RDIMM kit

This 16 GB kit contains two 8 GB DDR3L 1333 PC3L-10600 CL9 registered DIMMs. Each module runs at 1.35 V and uses a 2Rx4 organisation with 240 pins. The memory is ECC registered and intended for compatible workstations, servers, NAS systems and routers.

Suited for ECC registered DDR3L platforms only

It fits systems that require registered ECC DDR3L 1333 memory and support 2Rx4 modules. It will not work in standard desktop computers that use unbuffered non-ECC memory. Builders who need unbuffered modules or a different voltage should look at other products.

Verify registered ECC DDR3L 1333 support

Check that your motherboard or chassis accepts 240-pin registered ECC DDR3L DIMMs at 1.35 V and can run at 1333 MT/s with CL9 timing. Confirm the platform supports 2Rx4 rank configuration and dual-channel operation before ordering.

Helstu kostir

  • ECC registered design protects data integrity in servers
  • Dual-channel 2 x 8 GB kit delivers 16 GB total capacity
  • DDR3L 1333 PC3L-10600 CL9 matches JEDEC-standard specifications
  • Low 1.35 V operation reduces power draw in compatible systems
  • 240-pin RDIMM form factor fits select workstations and servers

Tæknilýsing

BrandOWC
Part Number1R3T32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does this kit require a motherboard with 240-pin DDR3L slots that support ECC registered memory?

Yes, the modules are 240-pin DDR3L ECC registered RDIMMs that need a workstation, server or NAS board designed for registered memory and 1.35 V operation.

Can I add these two 8 GB sticks to a system that already has unbuffered DDR3L DIMMs installed?

No, registered memory cannot be mixed with unbuffered modules; the board must run all slots in registered mode for this kit to function.

How can I verify the kit is running at the correct speed and latency after installation?

Check the BIOS or a system-information tool — it should report DDR3L-1333 (PC3L-10600) with CL9 timings and 1.35 V on both channels.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.