Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

OWC

OWC 16GB (2x8GB) DDR3L 1333 PC3L-10600 CL9 2Rx4 240-pin 1.35V ECC Registered RDIMM server RAM

SKU CH-82WM-FAES8

Adds 16 GB of DDR3L ECC registered memory at 1333 MHz to compatible workstations and servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes

Rank 2Rx4

  • ECC registered design protects data integrity in servers
  • Dual-channel 2 x 8 GB kit delivers 16 GB total capacity
  • DDR3L 1333 PC3L-10600 CL9 matches JEDEC-standard specifications
  • Low 1.35 V operation reduces power draw in compatible systems
  • 240-pin RDIMM form factor fits select workstations and servers

16 GB dual-channel DDR3L ECC RDIMM kit

This 16 GB kit contains two 8 GB DDR3L 1333 PC3L-10600 CL9 registered DIMMs. Each module runs at 1.35 V and uses a 2Rx4 organisation with 240 pins. The memory is ECC registered and intended for compatible workstations, servers, NAS systems and routers.

Suited for ECC registered DDR3L platforms only

It fits systems that require registered ECC DDR3L 1333 memory and support 2Rx4 modules. It will not work in standard desktop computers that use unbuffered non-ECC memory. Builders who need unbuffered modules or a different voltage should look at other products.

Verify registered ECC DDR3L 1333 support

Check that your motherboard or chassis accepts 240-pin registered ECC DDR3L DIMMs at 1.35 V and can run at 1333 MT/s with CL9 timing. Confirm the platform supports 2Rx4 rank configuration and dual-channel operation before ordering.

Pluspunten

  • ECC registered design protects data integrity in servers
  • Dual-channel 2 x 8 GB kit delivers 16 GB total capacity
  • DDR3L 1333 PC3L-10600 CL9 matches JEDEC-standard specifications
  • Low 1.35 V operation reduces power draw in compatible systems
  • 240-pin RDIMM form factor fits select workstations and servers

Specificaties

BrandOWC
Part Number1R3T32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does this kit require a motherboard with 240-pin DDR3L slots that support ECC registered memory?

Yes, the modules are 240-pin DDR3L ECC registered RDIMMs that need a workstation, server or NAS board designed for registered memory and 1.35 V operation.

Can I add these two 8 GB sticks to a system that already has unbuffered DDR3L DIMMs installed?

No, registered memory cannot be mixed with unbuffered modules; the board must run all slots in registered mode for this kit to function.

How can I verify the kit is running at the correct speed and latency after installation?

Check the BIOS or a system-information tool — it should report DDR3L-1333 (PC3L-10600) with CL9 timings and 1.35 V on both channels.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.