Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board with black memory chips and gold edge connector

OWC

OWC 16GB DDR4 2133MHz CL15 1.2V 288-pin UDIMM HP Phoenix 860-011ns 860-012nf 860-013nf 860-014 860-014nf

SKU CH-DVB6-M3BH5

A 16GB DDR4 2133MHz CL15 UDIMM module for HP Envy Phoenix 860 series desktops

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts PC responsiveness with 16 GB DDR4 2133 MHz CL15 module
  • Low 1.2 V operation reduces power draw and heat output
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Tested for HP Envy Phoenix 860-011ns, 860-012nf, 860-013nf, 860-014, 860-014nf
  • Simple DIY installation fits 288-pin UDIMM slots in seconds

HP ENVY Phoenix 860 DDR4 Upgrade

This 16GB DDR4 2133MHz UDIMM is built specifically for HP ENVY Phoenix 860-011ns 860-012nf 860-013nf 860-014 and 860-014nf desktops. It runs at 1.2V with CL15 latency and uses a standard 288-pin unbuffered non-ECC layout. The module adds 16GB of capacity in a single stick.

Replaces Slower or Smaller DDR4 Modules

If the system currently runs 8GB or lower speed DDR4 this upgrade doubles capacity and restores the rated 2133MHz throughput. The jump is worth it when multitasking stutters or large files exceed the installed memory. It will not add ECC or registered buffering if the platform does not already support those features.

DDR4 2133MHz Interface Limits

The PC4-17000 standard caps transfer rate at 2133MT/s so bandwidth cannot exceed that ceiling regardless of CPU capability. CL15 timing fixes the minimum latency window and 1.2V operation prevents higher voltage overclocking headroom. Systems requiring ECC error correction or registered signal buffering cannot use this unbuffered non-ECC stick.

Helstu kostir

  • Boosts PC responsiveness with 16 GB DDR4 2133 MHz CL15 module
  • Low 1.2 V operation reduces power draw and heat output
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Tested for HP Envy Phoenix 860-011ns, 860-012nf, 860-013nf, 860-014, 860-014nf
  • Simple DIY installation fits 288-pin UDIMM slots in seconds

Tæknilýsing

BrandOWC
Part Number2U1D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ENVY Phoenix 860-011ns
HP ENVY Phoenix 860-012nf
HP ENVY Phoenix 860-013nf
HP ENVY Phoenix 860-014
HP ENVY Phoenix 860-014nf

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 288-pin DDR4 UDIMM fit the HP ENVY Phoenix 860-011ns motherboard slots?

Yes, the 288-pin DDR4 UDIMM matches the desktop DIMM slots used in the HP ENVY Phoenix 860-011ns and the other listed models.

What is the correct way to seat the 16GB DDR4 2133MHz module, and what step do people often miss?

Align the notch with the slot key, press firmly until both side clips click shut; the step often missed is verifying both clips are fully engaged.

When should the 16GB DDR4 2133MHz CL15 memory be replaced or checked?

Replace if memory diagnostics report errors or the system becomes unstable; otherwise the module is built to last the life of the HP ENVY Phoenix 860 series.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.