เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

OWC

OWC 16GB DDR4 2133MHz CL15 1.2V 288-pin UDIMM HP Phoenix 860-011ns 860-012nf 860-013nf 860-014 860-014nf

SKU CH-DVB6-M3BH5

A 16GB DDR4 2133MHz CL15 UDIMM module for HP Envy Phoenix 860 series desktops

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts PC responsiveness with 16 GB DDR4 2133 MHz CL15 module
  • Low 1.2 V operation reduces power draw and heat output
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Tested for HP Envy Phoenix 860-011ns, 860-012nf, 860-013nf, 860-014, 860-014nf
  • Simple DIY installation fits 288-pin UDIMM slots in seconds

HP ENVY Phoenix 860 DDR4 Upgrade

This 16GB DDR4 2133MHz UDIMM is built specifically for HP ENVY Phoenix 860-011ns 860-012nf 860-013nf 860-014 and 860-014nf desktops. It runs at 1.2V with CL15 latency and uses a standard 288-pin unbuffered non-ECC layout. The module adds 16GB of capacity in a single stick.

Replaces Slower or Smaller DDR4 Modules

If the system currently runs 8GB or lower speed DDR4 this upgrade doubles capacity and restores the rated 2133MHz throughput. The jump is worth it when multitasking stutters or large files exceed the installed memory. It will not add ECC or registered buffering if the platform does not already support those features.

DDR4 2133MHz Interface Limits

The PC4-17000 standard caps transfer rate at 2133MT/s so bandwidth cannot exceed that ceiling regardless of CPU capability. CL15 timing fixes the minimum latency window and 1.2V operation prevents higher voltage overclocking headroom. Systems requiring ECC error correction or registered signal buffering cannot use this unbuffered non-ECC stick.

จุดเด่น

  • Boosts PC responsiveness with 16 GB DDR4 2133 MHz CL15 module
  • Low 1.2 V operation reduces power draw and heat output
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Tested for HP Envy Phoenix 860-011ns, 860-012nf, 860-013nf, 860-014, 860-014nf
  • Simple DIY installation fits 288-pin UDIMM slots in seconds

ข้อมูลจำเพาะ

BrandOWC
Part Number2U1D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ENVY Phoenix 860-011ns
HP ENVY Phoenix 860-012nf
HP ENVY Phoenix 860-013nf
HP ENVY Phoenix 860-014
HP ENVY Phoenix 860-014nf

รุ่นอื่นในตระกูลเดียวกัน

อีก 5 รุ่นในตระกูลเดียวกัน

ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ

คำถามเกี่ยวกับสินค้านี้

Will the 288-pin DDR4 UDIMM fit the HP ENVY Phoenix 860-011ns motherboard slots?

Yes, the 288-pin DDR4 UDIMM matches the desktop DIMM slots used in the HP ENVY Phoenix 860-011ns and the other listed models.

What is the correct way to seat the 16GB DDR4 2133MHz module, and what step do people often miss?

Align the notch with the slot key, press firmly until both side clips click shut; the step often missed is verifying both clips are fully engaged.

When should the 16GB DDR4 2133MHz CL15 memory be replaced or checked?

Replace if memory diagnostics report errors or the system becomes unstable; otherwise the module is built to last the life of the HP ENVY Phoenix 860 series.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที