Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green printed circuit board with black memory chips and gold edge connectors

OWC

OWC 16GB DDR4 3200 PC4-25600 CL22 2Rx8 288-pin 1.2V ECC Registered RDIMM memory upgrade

SKU CH-2WZP-1TZ98

A 16 GB DDR4 ECC registered RDIMM running at 3200 MT/s with CL22 latency, built for the QNAP TS-h1290FX server

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCYes

Capacity 16GB

  • ECC registered design protects data integrity in servers
  • 16 GB capacity expands multitasking headroom for demanding workloads
  • DDR4 3200 speed at CL22 latency delivers responsive throughput
  • 2 V operation keeps power draw low in dense configs
  • Validated for QNAP TS-h1290FX NAS systems

OWC 16GB DDR4 3200 ECC RDIMM

This 16GB DDR4 3200 registered DIMM adds error-correcting memory to the QNAP TS-h1290FX. It runs at PC4-25600 with CL22 latency at 1.2V. The 2Rx8 organisation and 288-pin form factor match the system requirements. Buyers needing unbuffered desktop memory cannot use this module.

Registered ECC constraints

Registered ECC RDIMMs require a motherboard and chipset that support buffered operation and error correction. The module will not function in standard desktop boards that accept only unbuffered memory. Mixing registered and unbuffered DIMMs in the same system prevents boot or causes instability. The JEDEC-standard DDR4 3200 interface defines the electrical and timing limits.

Verify QNAP TS-h1290FX compatibility

Confirm the NAS model is exactly TS-h1290FX before ordering. Check that all installed DIMMs share the same 16GB capacity, DDR4 3200 speed and registered ECC type for optimal performance. The part replaces QNAP RAM-16GDR4ECT0-RD-3200. Ensure the system has a free 288-pin DDR4 slot available.

Helstu kostir

  • ECC registered design protects data integrity in servers
  • 16 GB capacity expands multitasking headroom for demanding workloads
  • DDR4 3200 speed at CL22 latency delivers responsive throughput
  • 2 V operation keeps power draw low in dense configs
  • Validated for QNAP TS-h1290FX NAS systems

Tæknilýsing

BrandOWC
Part Number3R2D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemQNAP TS-h1290FX

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Should I pick a single 16GB module or add multiple sticks for the QNAP TS-h1290FX?

The module is a single 16GB stick; populate identical DIMMs per channel for best performance on the TS-h1290FX.

What does the 3200 speed rating deliver inside the TS-h1290FX?

The DDR4 3200 rating provides up to 25600 MB/s bandwidth when the system runs the memory at its rated frequency.

Will the 288-pin DDR4 ECC registered interface work with standard desktop boards?

No — the 288-pin registered ECC DIMM is designed for workstation and server platforms like the TS-h1290FX and is not compatible with unbuffered desktop memory slots.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.