Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 288-pin DDR4 RDIMM module with black chips, no heat spreader

OWC

OWC 2R4D42R816GB 16GB DDR4 2400MHz ECC Registered RDIMM memory upgrade

SKU CH-DKHE-RM6RB

16GB DDR4 2400MHz ECC registered RDIMM for Supermicro X10DRH-I, X10DRH-iT, X10DRi, X10DRi-T and X10DRL-i motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • ECC registered design protects server data integrity
  • 16 GB capacity expands workstation memory headroom
  • DDR4 2400 MHz speed matches PC4-19200 spec
  • 2 V operation reduces power draw
  • Validated for Supermicro X10DRH-I X10DRH-iT X10DRi X10DRi-T X10DRL-i

What this module is and who it serves

This is a 16GB DDR4 2400MHz ECC Registered RDIMM designed for Supermicro X10DRH-I, X10DRH-iT, X10DRi, X10DRi-T and X10DRL-i motherboards. It targets server, workstation and NAS builders who need registered error-correcting memory for those specific platforms.

What the registered ECC design changes

Registered buffering and ECC let the module work in multi-DIMM server configurations where unbuffered memory cannot be used. The CL17 latency and 1.2V operation match the PC4-19200 JEDEC standard for stable 2400MHz throughput in those systems.

What to verify before ordering

Confirm your motherboard is one of the five listed Supermicro models and that the memory slots accept 288-pin DDR4 RDIMMs. This module will not work in standard desktop boards and cannot be mixed with unbuffered DIMMs in the same system.

Helstu kostir

  • ECC registered design protects server data integrity
  • 16 GB capacity expands workstation memory headroom
  • DDR4 2400 MHz speed matches PC4-19200 spec
  • 2 V operation reduces power draw
  • Validated for Supermicro X10DRH-I X10DRH-iT X10DRi X10DRi-T X10DRL-i

Tæknilýsing

BrandOWC
Part Number2R4D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X10DRH-I
Supermicro Motherboard X10DRH-iT
Supermicro Motherboard X10DRi
Supermicro Motherboard X10DRi-T
Supermicro Motherboard X10DRL-i

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 288-pin DDR4 RDIMM need a heat spreader added later for continuous server duty?

The module ships without a heat spreader; its 1.2V DDR4 design runs within JEDEC thermal limits for the listed Supermicro X10 boards, so no extra cooling is required.

What limits sustained throughput on this 2400 MHz CL17 ECC registered kit?

The DDR4 2400 PC4-19200 CL17 timing and dual-rank 2Rx8 organisation set the bandwidth ceiling; the registered buffer adds one cycle but keeps signal integrity at full load.

How much power and heat does a 16 GB stick draw when the server runs all day?

At 1.2V the module draws roughly 3 W typical, producing modest heat that the chassis airflow on X10DRH-I, X10DRi or X10DRL-i boards handles without extra fan speed.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.