Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green 288-pin DDR4 RDIMM module with black chips, no heat spreader

OWC

OWC 2R4D42R816GB 16GB DDR4 2400MHz ECC Registered RDIMM memory upgrade

SKU CH-DKHE-RM6RB

16GB DDR4 2400MHz ECC registered RDIMM for Supermicro X10DRH-I, X10DRH-iT, X10DRi, X10DRi-T and X10DRL-i motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • ECC registered design protects server data integrity
  • 16 GB capacity expands workstation memory headroom
  • DDR4 2400 MHz speed matches PC4-19200 spec
  • 2 V operation reduces power draw
  • Validated for Supermicro X10DRH-I X10DRH-iT X10DRi X10DRi-T X10DRL-i

What this module is and who it serves

This is a 16GB DDR4 2400MHz ECC Registered RDIMM designed for Supermicro X10DRH-I, X10DRH-iT, X10DRi, X10DRi-T and X10DRL-i motherboards. It targets server, workstation and NAS builders who need registered error-correcting memory for those specific platforms.

What the registered ECC design changes

Registered buffering and ECC let the module work in multi-DIMM server configurations where unbuffered memory cannot be used. The CL17 latency and 1.2V operation match the PC4-19200 JEDEC standard for stable 2400MHz throughput in those systems.

What to verify before ordering

Confirm your motherboard is one of the five listed Supermicro models and that the memory slots accept 288-pin DDR4 RDIMMs. This module will not work in standard desktop boards and cannot be mixed with unbuffered DIMMs in the same system.

Prednosti

  • ECC registered design protects server data integrity
  • 16 GB capacity expands workstation memory headroom
  • DDR4 2400 MHz speed matches PC4-19200 spec
  • 2 V operation reduces power draw
  • Validated for Supermicro X10DRH-I X10DRH-iT X10DRi X10DRi-T X10DRL-i

Špecifikácie

BrandOWC
Part Number2R4D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X10DRH-I
Supermicro Motherboard X10DRH-iT
Supermicro Motherboard X10DRi
Supermicro Motherboard X10DRi-T
Supermicro Motherboard X10DRL-i

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will the 288-pin DDR4 RDIMM need a heat spreader added later for continuous server duty?

The module ships without a heat spreader; its 1.2V DDR4 design runs within JEDEC thermal limits for the listed Supermicro X10 boards, so no extra cooling is required.

What limits sustained throughput on this 2400 MHz CL17 ECC registered kit?

The DDR4 2400 PC4-19200 CL17 timing and dual-rank 2Rx8 organisation set the bandwidth ceiling; the registered buffer adds one cycle but keeps signal integrity at full load.

How much power and heat does a 16 GB stick draw when the server runs all day?

At 1.2V the module draws roughly 3 W typical, producing modest heat that the chassis airflow on X10DRH-I, X10DRi or X10DRL-i boards handles without extra fan speed.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.