Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR3 ECC registered DIMMs with gold contacts

OWC

OWC 32GB (2x16GB) DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM for Supermicro X8QB6 X8QBE

SKU CH-BDDP-CQ2QF

32 GB kit of two 16 GB DDR3 1333 ECC registered RDIMMs for Supermicro X8QB6 and X8QBE servers

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2 × 16 GB) expands memory capacity
  • DDR3 1333 CL9 matches Supermicro X8QB6 and X8QBE specs
  • 5 V registered RDIMM fits 240-pin workstation slots
  • JEDEC and RoHS compliant for reliable long-term operation

OWC 32 GB DDR3 ECC Registered Kit

This OWC kit provides 32 GB of DDR3 ECC registered memory in a matched pair of 16 GB modules. It is built for Supermicro X8QB6 and X8QBE server motherboards that require 240-pin registered DIMMs with error correction.

Who this suits and who should look elsewhere

System administrators upgrading compatible Supermicro servers will gain capacity with validated modules that meet JEDEC and RoHS standards. Buyers who need unbuffered desktop memory, a different DDR generation, or speeds beyond 1333 MHz cannot use this registered ECC kit.

Deciding specification: 240-pin DDR3 1333 CL9

The modules run at DDR3 1333 (PC3-10600) with CL9 latency at 1.5 V and use a 2Rx4 registered ECC design. Only motherboards that explicitly support 240-pin registered ECC DDR3 at this speed and rank configuration will accept the kit.

Helstu kostir

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2 × 16 GB) expands memory capacity
  • DDR3 1333 CL9 matches Supermicro X8QB6 and X8QBE specs
  • 5 V registered RDIMM fits 240-pin workstation slots
  • JEDEC and RoHS compliant for reliable long-term operation

Tæknilýsing

BrandOWC
Part Number1R3D32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8QB6 Series
Supermicro Motherboard X8QBE Series

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much power does the 1.5V DDR3 1333 kit draw when the server runs continuously?

Each 16GB module operates at 1.5V; total power draw depends on the Supermicro X8QB6 or X8QBE platform and workload, not on the modules alone.

What motherboard must I already have for this 2Rx4 registered ECC kit to function?

A Supermicro X8QB6 series or X8QBE series motherboard with 240-pin DDR3 slots that support registered ECC memory.

Can I keep my existing unbuffered DDR3 DIMMs and add this registered kit alongside them?

No — registered ECC modules cannot be mixed with unbuffered memory; all slots must use registered ECC DIMMs for the system to work.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.