Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

OWC

OWC 32GB (2x16GB) DDR3L 1600 CL11 2Rx4 240-pin 1.35V ECC Registered RDIMM server RAM

SKU CH-X6QQ-X1D3Q

A 32 GB DDR3L ECC registered dual-channel kit for servers and workstations

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Rank 2Rx4

  • ECC Registered design protects data integrity in servers
  • 32 GB dual-channel kit doubles memory bandwidth
  • DDR3L 1600 CL11 speed matches JEDEC specifications
  • Low 1.35 V voltage reduces power draw and heat
  • 240-pin RDIMM form factor fits compatible workstations and NAS systems

Server memory kit

This OWC kit provides 32GB of DDR3L ECC Registered memory in a matched pair of 16GB modules. It is built for workstations, servers, NAS systems or routers that require 240-pin RDIMMs with error correction. The modules run at 1600MHz with CL11 latency at 1.35V. They will not work in standard desktop computers that expect unbuffered memory.

Installation notes

Each module uses the standard 240-pin DDR3L form factor and seats in a typical server DIMM slot without tools. The kit is a dual-channel pair, so both sticks should be installed in the correct bank layout for the platform. Because this is registered ECC memory, it cannot be mixed with unbuffered modules and the system must support registered DIMMs or the kit will not post.

Suitable buyers

This kit suits administrators extending the life of older DDR3L server platforms or building cost-effective replacement nodes that need 32GB of registered ECC capacity. It is not for desktop PC builders, laptop upgraders or any system that requires unbuffered non-ECC memory. Buyers who need higher densities, faster speeds or a different voltage should look for modules specified for their platform.

Helstu kostir

  • ECC Registered design protects data integrity in servers
  • 32 GB dual-channel kit doubles memory bandwidth
  • DDR3L 1600 CL11 speed matches JEDEC specifications
  • Low 1.35 V voltage reduces power draw and heat
  • 240-pin RDIMM form factor fits compatible workstations and NAS systems

Tæknilýsing

BrandOWC
Part Number1R6T32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How can I verify the 32 GB kit is running at 1600 MHz with CL11 latency after installation?

Enter the system BIOS or UEFI and confirm the memory frequency reads 1600 MHz and CAS latency shows 11. ECC status should report as active.

What exactly ships in the box and is anything else required to use the modules?

The kit contains two 16 GB DDR3L 240-pin ECC registered RDIMMs. No extra parts are needed if the server or workstation has free 240-pin DDR3L slots.

Why choose the 2Rx4 1.35 V registered version instead of another capacity or voltage?

This 32 GB dual-channel kit uses 2Rx4 organization at 1.35 V, matching the PC3L-12800 JEDEC spec for compatible workstations, servers and NAS systems.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.