Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR3L ECC registered RDIMM modules 240-pin 1.35V

OWC

OWC 32GB (2x16GB) DDR3L 1600 CL11 2Rx4 240-pin 1.35V ECC Registered RDIMM server RAM

SKU CH-X6QQ-X1D3Q

A 32 GB DDR3L ECC registered dual-channel kit for servers and workstations

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 32GB (2 x 16GB)

Rank 2Rx4

  • ECC Registered design protects data integrity in servers
  • 32 GB dual-channel kit doubles memory bandwidth
  • DDR3L 1600 CL11 speed matches JEDEC specifications
  • Low 1.35 V voltage reduces power draw and heat
  • 240-pin RDIMM form factor fits compatible workstations and NAS systems

Server memory kit

This OWC kit provides 32GB of DDR3L ECC Registered memory in a matched pair of 16GB modules. It is built for workstations, servers, NAS systems or routers that require 240-pin RDIMMs with error correction. The modules run at 1600MHz with CL11 latency at 1.35V. They will not work in standard desktop computers that expect unbuffered memory.

Installation notes

Each module uses the standard 240-pin DDR3L form factor and seats in a typical server DIMM slot without tools. The kit is a dual-channel pair, so both sticks should be installed in the correct bank layout for the platform. Because this is registered ECC memory, it cannot be mixed with unbuffered modules and the system must support registered DIMMs or the kit will not post.

Suitable buyers

This kit suits administrators extending the life of older DDR3L server platforms or building cost-effective replacement nodes that need 32GB of registered ECC capacity. It is not for desktop PC builders, laptop upgraders or any system that requires unbuffered non-ECC memory. Buyers who need higher densities, faster speeds or a different voltage should look for modules specified for their platform.

Kohokohdat

  • ECC Registered design protects data integrity in servers
  • 32 GB dual-channel kit doubles memory bandwidth
  • DDR3L 1600 CL11 speed matches JEDEC specifications
  • Low 1.35 V voltage reduces power draw and heat
  • 240-pin RDIMM form factor fits compatible workstations and NAS systems

Tekniset tiedot

BrandOWC
Part Number1R6T32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I verify the 32 GB kit is running at 1600 MHz with CL11 latency after installation?

Enter the system BIOS or UEFI and confirm the memory frequency reads 1600 MHz and CAS latency shows 11. ECC status should report as active.

What exactly ships in the box and is anything else required to use the modules?

The kit contains two 16 GB DDR3L 240-pin ECC registered RDIMMs. No extra parts are needed if the server or workstation has free 240-pin DDR3L slots.

Why choose the 2Rx4 1.35 V registered version instead of another capacity or voltage?

This 32 GB dual-channel kit uses 2Rx4 organization at 1.35 V, matching the PC3L-12800 JEDEC spec for compatible workstations, servers and NAS systems.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.