OWC 16GB DDR3L 1600 PC3L-12800 CL11 2Rx4 240-pin 1.35V ECC RDIMM server RAM
- 16GB
- 240-Pin DDR3L ECC R…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
16 GB dual-channel DDR3L 1600 CL11 ECC registered RDIMM kit for servers and workstations
Capacity 16GB (2 x 8GB)
This OWC kit supplies 16 GB of DDR3L 1600 memory in a matched pair of 8 GB registered DIMMs. ECC and register buffering protect data integrity in multi-socket workstations, servers and compatible NAS or router platforms. The modules run at 1.35 V and conform to JEDEC PC3L-12800 CL11 timings. They are not compatible with standard desktop motherboards or unbuffered memory.
Each DIMM operates at the DDR3L nominal voltage of 1.35 V, reducing power draw compared with 1.5 V DDR3 equivalents. The registered design places less electrical load on the memory controller, helping sustained throughput under continuous server workloads. No heat spreaders are fitted, so airflow across the 240-pin modules is determined by the host chassis. Acoustic impact is negligible because the memory itself has no moving parts.
The kit upgrades systems currently running lower-capacity or slower-speed registered ECC DDR3 modules. Moving to 1600 MHz CL11 increases memory bandwidth for virtualization, database or file-serving tasks. The jump is worthwhile when the platform supports DDR3L 1600 registered DIMMs and the workload is limited by memory capacity or latency. It does not suit boards that require unbuffered or non-ECC memory.
| Brand | OWC |
|---|---|
| Part Number | 1R6T31R4016P |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC registered mode is active — skipping the BIOS check is the common oversight.
No routine maintenance is required; the modules have no heat spreaders or moving parts, so replacement only occurs if a DIMM fails or capacity must be increased beyond 16GB.
The DDR3L 1600 CL11 timing and 1.35V voltage ceiling define the maximum stable throughput; sustained workloads will hit this bandwidth and latency boundary before any thermal limit.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?