OWC 16GB (2x8GB) DDR3L 1333 PC3L-10600 CL9 2Rx4 240-pin 1.35V ECC Registered RDIMM server RAM
- 16GB (2 x 8GB)
- 240-Pin DDR3L ECC R…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
ECC registered DDR3L kit adds 16 GB across two 8 GB modules at 1066 MHz CL7 for servers and workstations
Capacity 16GB (2 x 8GB)
Rank 2Rx4
This 16GB kit contains two 8GB DDR3L modules rated at 1066MHz with CL7 latency. Each stick is a 240-pin registered DIMM operating at 1.35V and includes ECC error correction. The modules use a 2Rx4 rank configuration and are designed as a dual-channel pair. They are built specifically for compatible workstations, servers, NAS systems or routers.
The DDR3L voltage of 1.35V reduces power draw compared with standard DDR3 modules running at 1.5V. No heat spreaders are fitted, so airflow across the bare PCB handles cooling in normal server chassis. Registered buffering adds a small electrical load but keeps signal integrity stable under sustained workloads.
These modules only function in systems that support registered ECC DDR3L memory. They will not work in standard desktop computers and cannot be mixed with unbuffered DIMMs. Verify that your platform explicitly lists DDR3L 1066 registered ECC support before purchasing.
| Brand | OWC |
|---|---|
| Part Number | 8R5T32R4016P |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1066 (PC3L 8500) |
| CAS Latency | CL7 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power down the server, open the chassis, align each 240-pin module with the DIMM slot notch, press firmly until the retention clips lock, then populate matching channel slots per the system manual to enable dual-channel operation.
No routine maintenance is required; if a module fails, replace it with an identical 8GB DDR3L 1066 CL7 2Rx4 registered DIMM to preserve ECC integrity and dual-channel balance.
The DDR3L 1066 PC3L-8500 speed and CL7 latency set the throughput ceiling; sustained workloads will hit this bandwidth limit before voltage or thermal constraints become a factor.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?