暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR3L ECC registered DIMMs, 240-pin, no heat spreader

OWC

OWC 16GB (2x8GB) DDR3L 1066 PC3L-8500 CL7 2Rx4 240-pin 1.35V ECC Registered DIMM Kit

SKU CH-E9DN-2AVQF

ECC registered DDR3L kit adds 16 GB across two 8 GB modules at 1066 MHz CL7 for servers and workstations

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1066 (PC3L 8500)
  • CAS LatencyCL7
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

Rank 2Rx4

  • ECC registered design protects data integrity in servers
  • 16GB dual-channel kit (2x8GB) boosts multi-threaded throughput
  • DDR3L 1066 PC3L-8500 CL7 matches JEDEC spec
  • 35V low-voltage modules cut power draw and heat
  • 240-pin RDIMM form factor fits workstations, servers, NAS and routers

ECC Registered DIMM Kit for Servers

This 16GB kit contains two 8GB DDR3L modules rated at 1066MHz with CL7 latency. Each stick is a 240-pin registered DIMM operating at 1.35V and includes ECC error correction. The modules use a 2Rx4 rank configuration and are designed as a dual-channel pair. They are built specifically for compatible workstations, servers, NAS systems or routers.

Thermals and Power at 1.35V

The DDR3L voltage of 1.35V reduces power draw compared with standard DDR3 modules running at 1.5V. No heat spreaders are fitted, so airflow across the bare PCB handles cooling in normal server chassis. Registered buffering adds a small electrical load but keeps signal integrity stable under sustained workloads.

Registered ECC Requirement

These modules only function in systems that support registered ECC DDR3L memory. They will not work in standard desktop computers and cannot be mixed with unbuffered DIMMs. Verify that your platform explicitly lists DDR3L 1066 registered ECC support before purchasing.

特長

  • ECC registered design protects data integrity in servers
  • 16GB dual-channel kit (2x8GB) boosts multi-threaded throughput
  • DDR3L 1066 PC3L-8500 CL7 matches JEDEC spec
  • 35V low-voltage modules cut power draw and heat
  • 240-pin RDIMM form factor fits workstations, servers, NAS and routers

仕様

BrandOWC
Part Number8R5T32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1066 (PC3L 8500)
CAS LatencyCL7
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the 240-pin DDR3L ECC RDIMM modules in a dual-channel kit?

Power down the server, open the chassis, align each 240-pin module with the DIMM slot notch, press firmly until the retention clips lock, then populate matching channel slots per the system manual to enable dual-channel operation.

What maintenance or replacement will the 1.35V ECC Registered DIMMs need later?

No routine maintenance is required; if a module fails, replace it with an identical 8GB DDR3L 1066 CL7 2Rx4 registered DIMM to preserve ECC integrity and dual-channel balance.

What limit appears first when the 1066MHz CL7 registered memory runs under sustained load?

The DDR3L 1066 PC3L-8500 speed and CL7 latency set the throughput ceiling; sustained workloads will hit this bandwidth limit before voltage or thermal constraints become a factor.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。