OWC 16GB DDR3L 1600 PC3L-12800 CL11 2Rx4 240-pin 1.35V ECC RDIMM server RAM
- 16GB
- 240-Pin DDR3L ECC R…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
OWC
16 GB dual-channel DDR3L 1600 CL11 ECC registered RDIMM kit for servers and workstations
Capacity 16GB (2 x 8GB)
This OWC kit supplies 16 GB of DDR3L 1600 memory in a matched pair of 8 GB registered DIMMs. ECC and register buffering protect data integrity in multi-socket workstations, servers and compatible NAS or router platforms. The modules run at 1.35 V and conform to JEDEC PC3L-12800 CL11 timings. They are not compatible with standard desktop motherboards or unbuffered memory.
Each DIMM operates at the DDR3L nominal voltage of 1.35 V, reducing power draw compared with 1.5 V DDR3 equivalents. The registered design places less electrical load on the memory controller, helping sustained throughput under continuous server workloads. No heat spreaders are fitted, so airflow across the 240-pin modules is determined by the host chassis. Acoustic impact is negligible because the memory itself has no moving parts.
The kit upgrades systems currently running lower-capacity or slower-speed registered ECC DDR3 modules. Moving to 1600 MHz CL11 increases memory bandwidth for virtualization, database or file-serving tasks. The jump is worthwhile when the platform supports DDR3L 1600 registered DIMMs and the workload is limited by memory capacity or latency. It does not suit boards that require unbuffered or non-ECC memory.
| Brand | OWC |
|---|---|
| Part Number | 1R6T31R4016P |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC registered mode is active — skipping the BIOS check is the common oversight.
No routine maintenance is required; the modules have no heat spreaders or moving parts, so replacement only occurs if a DIMM fails or capacity must be increased beyond 16GB.
The DDR3L 1600 CL11 timing and 1.35V voltage ceiling define the maximum stable throughput; sustained workloads will hit this bandwidth and latency boundary before any thermal limit.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?