OWC 32GB DDR3 1600 PC3-12800 CL11 4Rx4 240-pin 1.5V ECC Registered RDIMM server RAM
- 32GB
- 240-Pin DDR3 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
A 32 GB quad-channel kit of 240-pin DDR3 ECC registered DIMMs running at 1333 MHz with CL9 latency and 1.5 V operation for compatible servers and workstations
Capacity 32GB (4 x 8GB)
Rank 2Rx4
This 32GB kit contains four 8GB DDR3 1333 registered DIMMs built to JEDEC PC3-10600 CL9 specifications. Each module runs at 1.5V with 2Rx4 organisation and a 240-pin interface. ECC and register buffering protect data integrity in multi-socket servers and qualified workstations. The dual-channel kit is validated for select OEM platforms that require registered memory.
Systems that currently run unbuffered DDR3 cannot use this kit because registered and unbuffered types cannot be mixed. The upgrade is worthwhile when the platform documentation calls for PC3-10600 registered DIMMs and the installed memory is lower speed, lower capacity or non-ECC. Matching all four slots with identical modules keeps timing consistent across channels.
Four ranks per channel provide headroom for virtualisation hosts, database buffers and large-file workloads that benefit from error correction. The 1333 MT/s rate and CL9 latency set the throughput ceiling; workloads that demand higher bandwidth or lower latency will exceed what this DDR3 generation can deliver. No heat spreaders are fitted, so airflow across the modules must be adequate.
| Brand | OWC |
|---|---|
| Part Number | 1R3D32R4032S |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3 ECC RDIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes — the kit uses the industry-standard 240-pin DDR3 form factor, so it fits any server or workstation board that accepts registered DDR3 DIMMs.
Install the modules in matched pairs across the two memory channels; the common error is placing all four sticks in a single channel or mixing them with unbuffered DIMMs, which prevents the system from booting.
ECC registered DDR3 DIMMs have no moving parts and typically last the life of the server; monitor the system's corrected-error counters and replace a module only if uncorrectable errors appear or the platform firmware flags a specific DIMM.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?