OWC 32GB DDR3 1600 PC3-12800 CL11 4Rx4 240-pin 1.5V ECC Registered RDIMM server RAM
- 32GB
- 240-Pin DDR3 ECC RD…
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
OWC
A 32 GB quad-channel kit of 240-pin DDR3 ECC registered DIMMs running at 1333 MHz with CL9 latency and 1.5 V operation for compatible servers and workstations
Capacity 32GB (4 x 8GB)
Rank 2Rx4
This 32GB kit contains four 8GB DDR3 1333 registered DIMMs built to JEDEC PC3-10600 CL9 specifications. Each module runs at 1.5V with 2Rx4 organisation and a 240-pin interface. ECC and register buffering protect data integrity in multi-socket servers and qualified workstations. The dual-channel kit is validated for select OEM platforms that require registered memory.
Systems that currently run unbuffered DDR3 cannot use this kit because registered and unbuffered types cannot be mixed. The upgrade is worthwhile when the platform documentation calls for PC3-10600 registered DIMMs and the installed memory is lower speed, lower capacity or non-ECC. Matching all four slots with identical modules keeps timing consistent across channels.
Four ranks per channel provide headroom for virtualisation hosts, database buffers and large-file workloads that benefit from error correction. The 1333 MT/s rate and CL9 latency set the throughput ceiling; workloads that demand higher bandwidth or lower latency will exceed what this DDR3 generation can deliver. No heat spreaders are fitted, so airflow across the modules must be adequate.
| Brand | OWC |
|---|---|
| Part Number | 1R3D32R4032S |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3 ECC RDIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Yes — the kit uses the industry-standard 240-pin DDR3 form factor, so it fits any server or workstation board that accepts registered DDR3 DIMMs.
Install the modules in matched pairs across the two memory channels; the common error is placing all four sticks in a single channel or mixing them with unbuffered DIMMs, which prevents the system from booting.
ECC registered DDR3 DIMMs have no moving parts and typically last the life of the server; monitor the system's corrected-error counters and replace a module only if uncorrectable errors appear or the platform firmware flags a specific DIMM.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?