OWC 32GB DDR3 1600 PC3-12800 CL11 4Rx4 240-pin 1.5V ECC Registered RDIMM server RAM
- 32GB
- 240-Pin DDR3 ECC RD…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
A 32 GB quad-channel kit of 240-pin DDR3 ECC registered DIMMs running at 1333 MHz with CL9 latency and 1.5 V operation for compatible servers and workstations
Capacity 32GB (4 x 8GB)
Rank 2Rx4
This 32GB kit contains four 8GB DDR3 1333 registered DIMMs built to JEDEC PC3-10600 CL9 specifications. Each module runs at 1.5V with 2Rx4 organisation and a 240-pin interface. ECC and register buffering protect data integrity in multi-socket servers and qualified workstations. The dual-channel kit is validated for select OEM platforms that require registered memory.
Systems that currently run unbuffered DDR3 cannot use this kit because registered and unbuffered types cannot be mixed. The upgrade is worthwhile when the platform documentation calls for PC3-10600 registered DIMMs and the installed memory is lower speed, lower capacity or non-ECC. Matching all four slots with identical modules keeps timing consistent across channels.
Four ranks per channel provide headroom for virtualisation hosts, database buffers and large-file workloads that benefit from error correction. The 1333 MT/s rate and CL9 latency set the throughput ceiling; workloads that demand higher bandwidth or lower latency will exceed what this DDR3 generation can deliver. No heat spreaders are fitted, so airflow across the modules must be adequate.
| Brand | OWC |
|---|---|
| Part Number | 1R3D32R4032S |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3 ECC RDIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
Yes — the kit uses the industry-standard 240-pin DDR3 form factor, so it fits any server or workstation board that accepts registered DDR3 DIMMs.
Install the modules in matched pairs across the two memory channels; the common error is placing all four sticks in a single channel or mixing them with unbuffered DIMMs, which prevents the system from booting.
ECC registered DDR3 DIMMs have no moving parts and typically last the life of the server; monitor the system's corrected-error counters and replace a module only if uncorrectable errors appear or the platform firmware flags a specific DIMM.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม