OWC 32GB DDR3L 1866 CL13 4Rx4 240-pin 1.35V ECC RDIMM server RAM
- 32GB
- 240-Pin DDR3L ECC R…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
Four 8 GB DDR3L ECC registered DIMMs running at 1066 MHz with CL7 latency and 1.35 V operation
Capacity 32GB (4 x 8GB)
Rank 2Rx4
This OWC kit supplies 32GB of DDR3L memory in four 8GB registered DIMMs. It is built for workstations, servers, NAS devices and routers that require ECC error correction and registered buffering. The modules run at 1066MHz with CL7 latency and operate at the low 1.35V DDR3L voltage.
The kit suits administrators upgrading or repairing DDR3L registered platforms that accept 240-pin ECC RDIMMs. It will not work in standard desktop computers, in systems that require unbuffered non-ECC DIMMs, or in boards that only support higher-voltage DDR3. Buyers needing different capacities, speeds or form factors should look elsewhere.
The single decisive detail is the combination of 1.35V DDR3L voltage, registered buffering and ECC on a 240-pin DIMM. Only systems explicitly qualified for this exact electrical and signalling profile will recognise and run the modules reliably.
| Brand | OWC |
|---|---|
| Part Number | 8R5T32R4032S |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1066 (PC3L 8500) |
| CAS Latency | CL7 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The modules operate at the standard 1.35 V DDR3L level, so sustained full-load operation stays within JEDEC limits without additional voltage stress.
No heat spreader is fitted, so the DIMMs rely on chassis airflow; they add minimal thermal load and produce no audible noise themselves.
The board needs DDR3L 240-pin slots that support registered ECC memory and a memory controller able to address 2Rx4 modules.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม