暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR3 ECC registered DIMMs in static bags

OWC

OWC 32GB (4x8GB) DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM Server RAM

SKU CH-4Q2M-VRF9D

A 32 GB quad-channel kit of 240-pin DDR3 ECC registered DIMMs running at 1333 MHz with CL9 latency and 1.5 V operation for compatible servers and workstations

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

Rank 2Rx4

  • 32 GB total capacity across four 8 GB modules
  • Registered ECC design detects and corrects data errors
  • DDR3 1333 speed rated at PC3 10600 standard
  • 5 V operation meets JEDEC specification
  • 240 pin RDIMM form factor for server platforms

Server RDIMM kit for ECC workloads

This 32GB kit contains four 8GB DDR3 1333 registered DIMMs built to JEDEC PC3-10600 CL9 specifications. Each module runs at 1.5V with 2Rx4 organisation and a 240-pin interface. ECC and register buffering protect data integrity in multi-socket servers and qualified workstations. The dual-channel kit is validated for select OEM platforms that require registered memory.

Replaces unbuffered or slower DDR3 modules

Systems that currently run unbuffered DDR3 cannot use this kit because registered and unbuffered types cannot be mixed. The upgrade is worthwhile when the platform documentation calls for PC3-10600 registered DIMMs and the installed memory is lower speed, lower capacity or non-ECC. Matching all four slots with identical modules keeps timing consistent across channels.

Handles 32GB of registered ECC capacity

Four ranks per channel provide headroom for virtualisation hosts, database buffers and large-file workloads that benefit from error correction. The 1333 MT/s rate and CL9 latency set the throughput ceiling; workloads that demand higher bandwidth or lower latency will exceed what this DDR3 generation can deliver. No heat spreaders are fitted, so airflow across the modules must be adequate.

特長

  • 32 GB total capacity across four 8 GB modules
  • Registered ECC design detects and corrects data errors
  • DDR3 1333 speed rated at PC3 10600 standard
  • 5 V operation meets JEDEC specification
  • 240 pin RDIMM form factor for server platforms

仕様

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will these 240-pin DDR3 RDIMMs fit my server's standard DIMM slots?

Yes — the kit uses the industry-standard 240-pin DDR3 form factor, so it fits any server or workstation board that accepts registered DDR3 DIMMs.

What is the correct way to populate the four 8 GB modules for dual-channel operation, and what mistake do installers often make?

Install the modules in matched pairs across the two memory channels; the common error is placing all four sticks in a single channel or mixing them with unbuffered DIMMs, which prevents the system from booting.

When will the ECC registered modules need replacement, and what should I watch for?

ECC registered DDR3 DIMMs have no moving parts and typically last the life of the server; monitor the system's corrected-error counters and replace a module only if uncorrectable errors appear or the platform firmware flags a specific DIMM.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。