Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green circuit boards with gold edge connectors and black memory chips

OWC

OWC 8GB (2x4GB) DDR3L 1600 CL11 1.35V SODIMM Kit for Synology DS1517+

SKU CH-V94X-G1AST

An 8 GB DDR3L 1600 CL11 SODIMM kit built for Synology DS1517+ NAS upgrades

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3L Non-ECC SODIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo

Capacity 8GB (2 x 4GB)

  • 8 GB dual-channel kit boosts NAS responsiveness with matched 2×4 GB modules
  • DDR3L 1600 CL11 at 1.35 V runs cool and efficient in Synology DS1517+
  • 204-pin SODIMM form factor drops straight into the NAS memory slots
  • JEDEC-standard DDR3L ensures warranty-safe compatibility with Synology part RAM1600DDR3L-4GBx2
  • Non-ECC unbuffered 1Rx8 design keeps latency low for everyday workloads

Synology DS1517+ Memory Kit

This OWC kit provides 8GB of DDR3L memory in two 4GB SODIMM modules. It is designed specifically for the Synology DS1517+ NAS and runs at 1600MHz with CL11 latency at 1.35V.

Non-ECC Unbuffered Upgrade

The kit suits owners of the DS1517+ who need a straightforward capacity increase without ECC or registered DIMMs. It is not for systems that require error-correcting code or registered memory modules.

JEDEC DDR3L 1600 Specification

The decisive specification is the DDR3L 1600 (PC3L-12800) JEDEC standard at 1.35V. Only systems accepting this exact voltage and speed will operate correctly with these modules.

Helstu kostir

  • 8 GB dual-channel kit boosts NAS responsiveness with matched 2×4 GB modules
  • DDR3L 1600 CL11 at 1.35 V runs cool and efficient in Synology DS1517+
  • 204-pin SODIMM form factor drops straight into the NAS memory slots
  • JEDEC-standard DDR3L ensures warranty-safe compatibility with Synology part RAM1600DDR3L-4GBx2
  • Non-ECC unbuffered 1Rx8 design keeps latency low for everyday workloads

Tæknilýsing

BrandOWC
Part Number1S6T31R8008P
Capacity8GB (2 x 4GB)
Type204-Pin DDR3L Non-ECC SODIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemSynology NAS DS1517+

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will this 204-pin SODIMM kit fit the memory slots in my DS1517+?

Yes, the kit uses the 204-pin DDR3L SODIMM form factor that matches the DS1517+ memory slots, so no other parts are needed.

Can I run this 1600 MHz kit together with the factory memory already in the DS1517+?

The DS1517+ supports DDR3L 1600 modules; the system will run all installed memory at the lowest common speed.

How can I confirm the DS1517+ recognises the full 8 GB after installation?

Open DSM Control Panel, go to Info Center, and check that System Memory shows 8 GB.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.