Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green 204-pin DDR3L SODIMM modules, no heat spreader

OWC

OWC 8GB (2x4GB) DDR3L 1600 CL11 1.35V SODIMM Kit for Synology DS1817+ RS818+ RS818RP+ RS1219+

SKU CH-AM59-55BPC

DDR3L 1600 SODIMM kit adds 8 GB to Synology DS1817+, RS818+, RS818RP+ and RS1219+ NAS units

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3L Non-ECC SODIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo

Capacity 8GB (2 x 4GB)

  • 8 GB kit expands NAS capacity for heavier workloads
  • DDR3L 1600 CL11 modules run at 1.35 V for low power draw
  • 204-pin SODIMM form factor fits DS1817+ RS818+ RS818RP+ RS1219+
  • JEDEC and RoHS compliant so the upgrade keeps the original warranty
  • Dual-rank 1Rx8 design delivers 12800 MT/s bandwidth across two channels

Synology NAS DDR3L Upgrade Kit

This OWC memory kit provides 8 GB of DDR3L SODIMM RAM in a matched pair of 4 GB modules. It is built for Synology NAS models DS1817+, RS818+, RS818RP+ and RS1219+ that accept 204-pin unbuffered non-ECC memory running at 1.35 V. The kit replaces Synology part number RAM1600DDR3L-4GBx2 and meets JEDEC PC3L-12800 specifications.

Ideal for DS1817+ and RS Series Owners

The modules suit administrators who need to expand the installed memory in the listed Synology units to support more concurrent services or larger file caches. It is not for systems that require ECC error correction, registered DIMMs, a different voltage than 1.35 V, or a pin count other than 204. Buyers with other NAS brands or desktop motherboards should verify their platform's exact memory requirements before purchasing.

Deciding Specification: PC3L-12800 CL11 at 1.35 V

The single figure that determines compatibility is the JEDEC speed grade PC3L-12800 with CL11 latency at 1.35 V. Only NAS appliances that specify this exact DDR3L standard will accept the kit without configuration issues. Confirm that your Synology model documents support for PC3L-12800 1.35 V SODIMMs before ordering.

Helstu kostir

  • 8 GB kit expands NAS capacity for heavier workloads
  • DDR3L 1600 CL11 modules run at 1.35 V for low power draw
  • 204-pin SODIMM form factor fits DS1817+ RS818+ RS818RP+ RS1219+
  • JEDEC and RoHS compliant so the upgrade keeps the original warranty
  • Dual-rank 1Rx8 design delivers 12800 MT/s bandwidth across two channels

Tæknilýsing

BrandOWC
Part Number1S6T31R8008P
Capacity8GB (2 x 4GB)
Type204-Pin DDR3L Non-ECC SODIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemSynology NAS DS1817+
Synology NAS RS818+
Synology NAS RS818RP+
Synology NAS RS1219+

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Is the 8 GB kit the only capacity OWC offers for these Synology models?

The product listed here is an 8 GB kit made up of two 4 GB modules; no other capacities are mentioned for this part.

What does the 1600 speed rating mean once the modules are installed in a DS1817+?

The modules run at DDR3L 1600 with CL11 latency at 1.35 V, matching the NAS memory specification.

Does the 204-pin DDR3L interface limit the upgrade in any way?

The kit uses standard 204-pin DDR3L SODIMMs, the form factor required by the DS1817+, RS818+, RS818RP+ and RS1219+.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.