Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 240-pin DDR3 UDIMM module with black chips

OWC

OWC 8GB DDR3 1600 CL11 2Rx8 1.5V UDIMM HP ProDesk 600 G1

SKU CH-SCCP-YRXG5

An 8 GB DDR3 1600 CL11 UDIMM for HP ProDesk 600 G1 SFF and Tower models

  • Capacity8GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 8GB module doubles capacity for HP ProDesk 600 G1 multitasking
  • DDR3 1600 speed matches system bus for stable operation
  • CL11 latency keeps data access responsive under load
  • 5V JEDEC standard voltage ensures warranty-safe compatibility
  • 240-pin UDIMM fits SFF and Tower slots directly

8GB DDR3 module for HP ProDesk 600 G1

This single 8GB DDR3 1600 UDIMM is built for the HP ProDesk 600 G1 small-form-factor and tower chassis. It targets owners who want a straightforward capacity increase without changing voltage or timing settings. The non-ECC unbuffered design matches the original system specification.

240-pin JEDEC build with 1.5V operation

The module uses a standard 240-pin desktop DIMM form factor and runs at the JEDEC 1.5V level with CL11 latency. No heat spreader is fitted, keeping the profile low for tight SFF slots. Dual-rank 2Rx8 organisation fills one bank and leaves any second slot free for further expansion.

Replaces a 4GB stick or populates an empty slot

Adding this module doubles typical factory memory and removes the bottleneck when several applications share limited RAM. The upgrade is worthwhile when the system still runs the original 4GB configuration or when a free slot is available. Buyers who need registered or ECC memory for a server platform cannot use this part.

Helstu kostir

  • 8GB module doubles capacity for HP ProDesk 600 G1 multitasking
  • DDR3 1600 speed matches system bus for stable operation
  • CL11 latency keeps data access responsive under load
  • 5V JEDEC standard voltage ensures warranty-safe compatibility
  • 240-pin UDIMM fits SFF and Tower slots directly

Tæknilýsing

BrandOWC
Part Number1U6D32R808GB
Capacity8GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ProDesk 600 G1 SFF
HP ProDesk 600 G1 Tower

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What speed does the DDR3 PC3-12800 1600MHz CL11 interface actually deliver?

The module runs at 1600 MHz with a CAS latency of 11, matching the JEDEC PC3-12800 standard for DDR3 desktop memory.

Will the 240-pin DDR3 UDIMM fit the HP ProDesk 600 G1 SFF and Tower chassis?

Yes, the 240-pin unbuffered DIMM is the correct form factor for both the small-form-factor and tower versions of the 600 G1.

How is the module installed and what step do people often miss?

Power off the PC, open the case, align the notch on the 240-pin DIMM with the slot key, press firmly until both retention clips click shut, then power on.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.