Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board with black memory chips and gold edge connector

OWC

OWC 4GB DDR3 1066 PC3-8500 CL7 2Rx8 204-pin 1.5V Non-ECC SODIMM for N3000 (1657)

SKU CH-78YA-V301J

A 4GB DDR3 1066 SODIMM built for the NCR POS N3000 Site Controller 1657

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.5V
  • ECCNo
  • 4GB capacity adds multitasking headroom for N3000
  • DDR3 1066 PC3-8500 CL7 matches system timing exactly
  • 5V JEDEC standard voltage ensures warranty-safe operation
  • 2Rx8 unbuffered 204-pin SODIMM fits N3000 slot directly
  • OWC lab-tested module built to exceed OEM specifications

Single-module DDR3 upgrade

This OWC module adds four gigabytes of DDR3 1066 memory to the NCR POS N3000 Site Controller (1657). It uses the 204-pin SODIMM form factor and runs at 1.5 volts with CL7 latency. The stick is unbuffered, non-ECC and built to JEDEC PC3-8500 specifications.

Fits the N3000 site controller only

The part is validated for the N3000 (1657) and will not work in systems that require a different pin count, voltage or DDR generation. Buyers who need ECC error correction, registered modules, higher capacities or a different memory standard should look at other products.

Steady throughput under load

Because the module is unbuffered and non-ECC, sustained workloads behave like any standard DDR3 SODIMM at 1066 MT/s. No heat spreader is fitted, so adequate chassis airflow keeps temperatures stable during continuous operation.

Helstu kostir

  • 4GB capacity adds multitasking headroom for N3000
  • DDR3 1066 PC3-8500 CL7 matches system timing exactly
  • 5V JEDEC standard voltage ensures warranty-safe operation
  • 2Rx8 unbuffered 204-pin SODIMM fits N3000 slot directly
  • OWC lab-tested module built to exceed OEM specifications

Tæknilýsing

BrandOWC
Part Number8S5D32R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemNCR POS N3000 Site Controller (1657)

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What type of memory slot must the NCR POS N3000 Site Controller (1657) have to accept this module?

The system must provide a 204-pin DDR3 SODIMM slot that runs at 1.5 V and supports PC3-8500 1066 MHz CL7 unbuffered non-ECC memory.

Can I keep an existing DDR3 1066 CL7 SODIMM in the second slot alongside this 4 GB module?

Yes, provided the other module is also a 204-pin 1.5 V unbuffered non-ECC DDR3 1066 CL7 SODIMM; the controller will run both at the shared 1066 MHz speed.

How do I verify the upgrade is recognised after installation?

Power on the N3000 Site Controller and open the BIOS or operating-system memory summary; it should show the additional 4 GB DDR3 1066 module present and running at the correct speed.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.