Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green printed circuit board with black memory chips on both sides and gold edge connectors

OWC

OWC 8GB DDR4 2133 CL15 1.2V UDIMM memory upgrade for HP Envy Phoenix 860

SKU CH-DXFV-ZWNFJ

8 GB DDR4 2133 MHz CL15 UDIMM upgrade for HP Envy Phoenix 860 desktops

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • 8GB capacity adds multitasking headroom for HP Envy Phoenix 860
  • DDR4 2133MHz CL15 speed matches factory specifications exactly
  • 2V low-voltage operation keeps power draw minimal
  • 288-pin UDIMM form factor fits desktop DIMM slots directly
  • JEDEC and RoHS compliant for warranty-safe upgrade

OWC 8GB DDR4 2133 UDIMM for HP Envy Phoenix 860

This OWC memory module adds 8GB of DDR4 2133 capacity to compatible HP Envy Phoenix 860 desktops. It is a 288-pin unbuffered UDIMM rated at CL15 latency and 1.2V operation. The part is designed as a direct, warranty-safe upgrade for the listed workstation models.

Check motherboard slots and maximum supported memory

Verify that your HP Envy Phoenix 860 has a free 288-pin DDR4 DIMM slot before ordering. Confirm the system’s maximum total memory limit in the HP documentation so the new module does not exceed it. The board must accept non-ECC unbuffered DDR4 at 2133 MT/s.

Replaces slower or smaller DDR4 modules

Swapping an existing 4GB or lower DDR4 stick for this 8GB module increases total capacity for multitasking and larger workloads. The upgrade is worthwhile when the current configuration leaves empty slots or runs at a lower speed than 2133 MT/s. Systems already at the memory ceiling or using a different DDR generation cannot use this part.

Helstu kostir

  • 8GB capacity adds multitasking headroom for HP Envy Phoenix 860
  • DDR4 2133MHz CL15 speed matches factory specifications exactly
  • 2V low-voltage operation keeps power draw minimal
  • 288-pin UDIMM form factor fits desktop DIMM slots directly
  • JEDEC and RoHS compliant for warranty-safe upgrade

Tæknilýsing

BrandOWC
Part Number2U1D42R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ENVY Phoenix 860-009nf
HP ENVY Phoenix 860-010
HP ENVY Phoenix 860-010ng
HP ENVY Phoenix 860-011NF
HP ENVY Phoenix 860-011no

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What comes in the box and do I need any extra parts to install this memory?

The package contains one 8GB 288-pin DDR4 UDIMM module. No extra cables, brackets or tools are required; the DIMM slots directly into the motherboard of the listed HP Envy Phoenix 860 models.

Should I choose the 8GB CL15 2133MHz version or a different capacity for my HP Envy Phoenix 860?

This specific part is an 8GB module rated at 2133MHz CL15 1.2V. If your system has free slots you can add one or more of these identical modules to reach the total capacity you need.

What does the 2133MHz CL15 rating mean once the module is running in my HP Envy Phoenix 860?

The module will operate at 2133MHz with a CAS latency of 15 cycles at the standard 1.2V JEDEC voltage, giving the rated bandwidth and timing for the compatible Phoenix 860 platforms.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.