暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips on both sides and gold edge connectors

OWC

OWC 8GB DDR4 2133 CL15 1.2V UDIMM memory upgrade for HP Envy Phoenix 860

SKU CH-DXFV-ZWNFJ

8 GB DDR4 2133 MHz CL15 UDIMM upgrade for HP Envy Phoenix 860 desktops

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • 8GB capacity adds multitasking headroom for HP Envy Phoenix 860
  • DDR4 2133MHz CL15 speed matches factory specifications exactly
  • 2V low-voltage operation keeps power draw minimal
  • 288-pin UDIMM form factor fits desktop DIMM slots directly
  • JEDEC and RoHS compliant for warranty-safe upgrade

OWC 8GB DDR4 2133 UDIMM for HP Envy Phoenix 860

This OWC memory module adds 8GB of DDR4 2133 capacity to compatible HP Envy Phoenix 860 desktops. It is a 288-pin unbuffered UDIMM rated at CL15 latency and 1.2V operation. The part is designed as a direct, warranty-safe upgrade for the listed workstation models.

Check motherboard slots and maximum supported memory

Verify that your HP Envy Phoenix 860 has a free 288-pin DDR4 DIMM slot before ordering. Confirm the system’s maximum total memory limit in the HP documentation so the new module does not exceed it. The board must accept non-ECC unbuffered DDR4 at 2133 MT/s.

Replaces slower or smaller DDR4 modules

Swapping an existing 4GB or lower DDR4 stick for this 8GB module increases total capacity for multitasking and larger workloads. The upgrade is worthwhile when the current configuration leaves empty slots or runs at a lower speed than 2133 MT/s. Systems already at the memory ceiling or using a different DDR generation cannot use this part.

特長

  • 8GB capacity adds multitasking headroom for HP Envy Phoenix 860
  • DDR4 2133MHz CL15 speed matches factory specifications exactly
  • 2V low-voltage operation keeps power draw minimal
  • 288-pin UDIMM form factor fits desktop DIMM slots directly
  • JEDEC and RoHS compliant for warranty-safe upgrade

仕様

BrandOWC
Part Number2U1D42R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ENVY Phoenix 860-009nf
HP ENVY Phoenix 860-010
HP ENVY Phoenix 860-010ng
HP ENVY Phoenix 860-011NF
HP ENVY Phoenix 860-011no

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What comes in the box and do I need any extra parts to install this memory?

The package contains one 8GB 288-pin DDR4 UDIMM module. No extra cables, brackets or tools are required; the DIMM slots directly into the motherboard of the listed HP Envy Phoenix 860 models.

Should I choose the 8GB CL15 2133MHz version or a different capacity for my HP Envy Phoenix 860?

This specific part is an 8GB module rated at 2133MHz CL15 1.2V. If your system has free slots you can add one or more of these identical modules to reach the total capacity you need.

What does the 2133MHz CL15 rating mean once the module is running in my HP Envy Phoenix 860?

The module will operate at 2133MHz with a CAS latency of 15 cycles at the standard 1.2V JEDEC voltage, giving the rated bandwidth and timing for the compatible Phoenix 860 platforms.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。