Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Compact gray aluminium fanless mini PC, industrial barebone form factor, matte anodised finish with visible cooling fins

partaker

partaker I34 barebone mini PC i5-4300U 8GB 512GB

SKU CH-1D7N-EDJ49

Fanless industrial mini-PC with Core i5-4300U, 8GB RAM, 512GB SSD, six COM ports and dual Gigabit LAN for automation

  • ColorGray
  • CPU TypeIntel Core i5 4th Gen

I34 I5 4300U 8G+512G

  • 4th Gen Core i5-4300U up to 2.90 GHz for industrial workloads
  • Fanless aluminium alloy chassis runs silent from -20 to 60 °C
  • Six COM ports RS232/485 plus four USB 3.0 and two USB 2.0
  • Dual Gigabit LAN with Wake-on-LAN and PXE boot support
  • Dual storage with mSATA slot and 2.5" SATA bay for flexible capacity

Industrial mini PC for automation

The Partaker I34 is a fanless barebone system built around an Intel Core i5-4300U processor with 8 GB of DDR3 memory and a 512 GB solid-state drive. Its aluminium alloy chassis operates silently from minus 20 to plus 60 Celsius, making it suitable for factory floors, logistics hubs and medical equipment racks where dust and vibration rule out conventional desktops.

Replaces bulky DIN-rail controllers

Six configurable COM ports and dual Gigabit Ethernet replace the tangle of USB-to-serial adapters and separate network cards that older SCADA setups require. The jump is worth it when a project needs legacy RS232 or RS485 links alongside modern IP connectivity without adding external hubs or increasing cabinet depth.

Mounts in standard enclosures

Four mounting holes on the 260 by 173 millimetre footprint align with common industrial brackets, and the single DC 12 V input simplifies wiring to existing power supplies. Installers should verify that the mSATA and 2.5 inch SATA bays match the chosen storage modules, and that the two mini-PCIe slots accept only half-height wireless or cellular cards.

Helstu kostir

  • 4th Gen Core i5-4300U up to 2.90 GHz for industrial workloads
  • Fanless aluminium alloy chassis runs silent from -20 to 60 °C
  • Six COM ports RS232/485 plus four USB 3.0 and two USB 2.0
  • Dual Gigabit LAN with Wake-on-LAN and PXE boot support
  • Dual storage with mSATA slot and 2.5" SATA bay for flexible capacity

Tæknilýsing

ColorGray
CPU TypeIntel Core i5 4th Gen

Aðrar útgáfur af þessari vöru

4 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What mounting clearance does the 260×173×61 mm fanless chassis require?

The aluminum alloy case measures 260×173×61 mm and relies on surface airflow; allow open space around all faces so heat can dissipate without forced air.

Which screw or latch secures the 2.5″ SATA drive during installation?

The internal 2.5″ SATA bay uses a screw-fastened caddy; the common mistake is seating the drive without tightening the caddy screws, which lets vibration disconnect the SATA connector.

When should the CMOS battery be checked or replaced?

The board includes a CLEAR CMOS button; if BIOS settings or system time start drifting after extended power-off periods, replace the onboard coin cell.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.