NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
Pstaroth
Non-modular 2000 W ATX unit with 92 % efficiency, 16 PCIe 6+2-pin connectors and automatic 110-260 V input for eight-GPU mining rigs
This 2000W ATX power supply is built for cryptocurrency mining rigs that run up to eight graphics cards simultaneously. It delivers ultra-high power with a 92% conversion efficiency rating to reduce energy waste during continuous operation. The unit accepts a wide 110V-260V input range and automatically switches between voltages for global compatibility. It targets builders who need dense GPU power in a single non-modular package.
The supply uses a fixed non-modular harness with one 24-pin ATX, one 4+4-pin CPU, sixteen 6+2-pin PCIe, eight SATA and four large 4-pin connectors. Pure copper core wiring resists high temperatures and improves durability over long mining sessions. A dust cover shields internals from moisture and particulates in harsh environments. High-temperature protection activates automatically when internal heat exceeds 50 centigrade to prevent damage. A 165mm ball-bearing fan provides airflow through a protective grill.
Verify that your chassis can accommodate a non-modular cable bundle of this density and that airflow reaches the 165mm fan intake. Confirm your local mains voltage sits within the 110V-260V range and that 220V is available for loads above 1000W as recommended. Ensure the sixteen 6+2-pin PCIe leads match the exact power requirements of your specific graphics cards. This unit is not suited for builds needing modular cabling or lower maximum wattage.
| Type | ATX |
|---|---|
| Maximum Power | 2000 W |
| Modular | Non-Modular |
It follows ATX 12V 2.31, which defines the 24-pin, 4+4-pin and 6+2-pin current limits that let the unit feed eight graphics cards and a modern CPU simultaneously.
The case needs a standard ATX PSU bay, room for a 165 mm fan, and openings for one 20+4-pin, one 4+4-pin, sixteen 6+2-pin, eight SATA, four big 4-pin and three IDE plugs.
Mount the unit with its fan facing the airflow path, plug every required 6+2-pin and 4+4-pin lead directly into the GPUs and motherboard, and remember to switch the input to 220 V when the load exceeds 1000 W.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?