NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Pstaroth
Non-modular 2000 W ATX unit with 92 % efficiency, 16 PCIe 6+2-pin connectors and automatic 110-260 V input for eight-GPU mining rigs
This 2000W ATX power supply is built for cryptocurrency mining rigs that run up to eight graphics cards simultaneously. It delivers ultra-high power with a 92% conversion efficiency rating to reduce energy waste during continuous operation. The unit accepts a wide 110V-260V input range and automatically switches between voltages for global compatibility. It targets builders who need dense GPU power in a single non-modular package.
The supply uses a fixed non-modular harness with one 24-pin ATX, one 4+4-pin CPU, sixteen 6+2-pin PCIe, eight SATA and four large 4-pin connectors. Pure copper core wiring resists high temperatures and improves durability over long mining sessions. A dust cover shields internals from moisture and particulates in harsh environments. High-temperature protection activates automatically when internal heat exceeds 50 centigrade to prevent damage. A 165mm ball-bearing fan provides airflow through a protective grill.
Verify that your chassis can accommodate a non-modular cable bundle of this density and that airflow reaches the 165mm fan intake. Confirm your local mains voltage sits within the 110V-260V range and that 220V is available for loads above 1000W as recommended. Ensure the sixteen 6+2-pin PCIe leads match the exact power requirements of your specific graphics cards. This unit is not suited for builds needing modular cabling or lower maximum wattage.
| Type | ATX |
|---|---|
| Maximum Power | 2000 W |
| Modular | Non-Modular |
It follows ATX 12V 2.31, which defines the 24-pin, 4+4-pin and 6+2-pin current limits that let the unit feed eight graphics cards and a modern CPU simultaneously.
The case needs a standard ATX PSU bay, room for a 165 mm fan, and openings for one 20+4-pin, one 4+4-pin, sixteen 6+2-pin, eight SATA, four big 4-pin and three IDE plugs.
Mount the unit with its fan facing the airflow path, plug every required 6+2-pin and 4+4-pin lead directly into the GPUs and motherboard, and remember to switch the input to 220 V when the load exceeds 1000 W.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?