Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Five small black microSD cards in a clear plastic case

SanDisk

SanDisk Industrial 16GB microSDHC Class 10 5 Pack

SKU CH-7Y47-HP60K

Five 16 GB Class 10 microSDHC cards rated for –25 °C to 85 °C operation with up to 80 MB/s read and 50 MB/s write

  • Card typeMicroSD
  • TypemicroSDHC
  • Capacity16GB
  • Speed Class RatingClass 10
  • Option5-Pack

Option 5-Pack

  • 5 cards in one pack for multi-device deployment
  • Read up to 80 MB/s and write up to 50 MB/s for fast data logging
  • Endurance rated to 384 TB written for long service life
  • Withstands -40 °C to 85 °C operation in harsh environments
  • Water, shock, vibration, X-ray, magnet and impact proof

Industrial microSDHC 16GB 5-pack

This pack contains five SanDisk Industrial microSDHC cards, each rated at 16GB capacity with Class 10 speed. They are built for data-intensive applications that require reliable logging and capture in harsh environments. The MLC NAND and wide-temperature design suit embedded, industrial and automotive use cases.

MLC endurance and rugged construction

The cards use MLC flash rated for up to 384 Terabytes Written, delivering high endurance for continuous write workloads. They are water proof, shock proof, vibration proof, X-ray proof, magnet proof and impact proof. An advanced firmware layer adds power immunity, auto and manual read refresh, ECC and wear leveling.

Wide temperature operation and low voltage

Operating temperature spans -25°C to 85°C and -40°C to 85°C with a supply range of 2.7V to 3.6V. Sequential read reaches up to 80MB/s and write up to 50MB/s. Health status monitoring, programmable ID, host lock and dynamic bit flip protection help maintain data integrity.

Helstu kostir

  • 5 cards in one pack for multi-device deployment
  • Read up to 80 MB/s and write up to 50 MB/s for fast data logging
  • Endurance rated to 384 TB written for long service life
  • Withstands -40 °C to 85 °C operation in harsh environments
  • Water, shock, vibration, X-ray, magnet and impact proof

Tæknilýsing

BrandSanDisk
Card typeMicroSD
SeriesIndustrial Wide Temp IX QD332
TypemicroSDHC
Capacity16GB
Speed Class RatingClass 10
Option5-Pack

Aðrar útgáfur af þessari vöru

4 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does the Class 10 rating on these SanDisk Industrial microSDHC cards limit real-world write speed to 10 MB/s?

Class 10 guarantees a minimum sustained write of 10 MB/s. These cards are rated for up to 50 MB/s write and up to 80 MB/s read, so actual throughput can be well above the class floor.

What device slot or adapter is required to use one of these 16 GB Industrial microSDHC cards?

They fit any standard microSDHC or microSDXC slot. For full-size SD devices use a passive microSD-to-SD adapter; the card itself is the microSD form factor.

Is any driver or firmware step needed when putting these Industrial microSDHC cards into service?

No host-side driver is required. The card’s on-board firmware handles power immunity, ECC, wear-leveling and read-refresh automatically; just insert and format with the host’s native tool.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.