Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Five small black microSD cards in a clear plastic case

SanDisk

SanDisk Industrial 16GB microSDHC Class 10 5 Pack

SKU CH-7Y47-HP60K

Five 16 GB Class 10 microSDHC cards rated for –25 °C to 85 °C operation with up to 80 MB/s read and 50 MB/s write

  • Card typeMicroSD
  • TypemicroSDHC
  • Capacity16GB
  • Speed Class RatingClass 10
  • Option5-Pack

Option 5-Pack

  • 5 cards in one pack for multi-device deployment
  • Read up to 80 MB/s and write up to 50 MB/s for fast data logging
  • Endurance rated to 384 TB written for long service life
  • Withstands -40 °C to 85 °C operation in harsh environments
  • Water, shock, vibration, X-ray, magnet and impact proof

Industrial microSDHC 16GB 5-pack

This pack contains five SanDisk Industrial microSDHC cards, each rated at 16GB capacity with Class 10 speed. They are built for data-intensive applications that require reliable logging and capture in harsh environments. The MLC NAND and wide-temperature design suit embedded, industrial and automotive use cases.

MLC endurance and rugged construction

The cards use MLC flash rated for up to 384 Terabytes Written, delivering high endurance for continuous write workloads. They are water proof, shock proof, vibration proof, X-ray proof, magnet proof and impact proof. An advanced firmware layer adds power immunity, auto and manual read refresh, ECC and wear leveling.

Wide temperature operation and low voltage

Operating temperature spans -25°C to 85°C and -40°C to 85°C with a supply range of 2.7V to 3.6V. Sequential read reaches up to 80MB/s and write up to 50MB/s. Health status monitoring, programmable ID, host lock and dynamic bit flip protection help maintain data integrity.

Kohokohdat

  • 5 cards in one pack for multi-device deployment
  • Read up to 80 MB/s and write up to 50 MB/s for fast data logging
  • Endurance rated to 384 TB written for long service life
  • Withstands -40 °C to 85 °C operation in harsh environments
  • Water, shock, vibration, X-ray, magnet and impact proof

Tekniset tiedot

BrandSanDisk
Card typeMicroSD
SeriesIndustrial Wide Temp IX QD332
TypemicroSDHC
Capacity16GB
Speed Class RatingClass 10
Option5-Pack

Tämän mallin muut versiot

4 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the Class 10 rating on these SanDisk Industrial microSDHC cards limit real-world write speed to 10 MB/s?

Class 10 guarantees a minimum sustained write of 10 MB/s. These cards are rated for up to 50 MB/s write and up to 80 MB/s read, so actual throughput can be well above the class floor.

What device slot or adapter is required to use one of these 16 GB Industrial microSDHC cards?

They fit any standard microSDHC or microSDXC slot. For full-size SD devices use a passive microSD-to-SD adapter; the card itself is the microSD form factor.

Is any driver or firmware step needed when putting these Industrial microSDHC cards into service?

No host-side driver is required. The card’s on-board firmware handles power immunity, ECC, wear-leveling and read-refresh automatically; just insert and format with the host’s native tool.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.