Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Pack of 25 small black microSDHC cards with gold contacts

SanDisk

SanDisk Industrial microSDHC 16GB U1 25-Pack

SKU CH-Z2V9-0ZJQB

Pack of 25 industrial-grade microSDHC cards rated U1 with 80 MB/s read, 50 MB/s write and 384 TBW endurance

  • Card typeMicroSD
  • TypemicroSDHC
  • Capacity16GB
  • Speed Class RatingU1
  • Read SpeedUp to 80MB/s
  • Write SpeedUp to 50MB/s

Option 25-Pack

  • Industrial-grade MLC withstands extreme environments
  • Up to 384 TB written for long-term logging
  • 80 MB/s read and 50 MB/s write capture data fast
  • Advanced firmware protects against power loss and bit errors
  • 25-pack simplifies deployment across multiple devices

Industrial-grade microSDHC 16 GB 25-pack

This pack contains twenty-five SanDisk Industrial microSDHC cards, each rated at 16 GB capacity with U1 speed class. They deliver sequential reads up to 80 MB/s and writes up to 50 MB/s. The series uses MLC NAND rated for up to 384 TB written, targeting embedded logging and data-intensive industrial deployments.

Installation notes and common issues

Cards insert into any standard microSD slot; no drivers or tools are required. Ensure the host device supports the 2.7 V to 3.6 V operating voltage range. The most frequent issue is selecting a consumer-grade card that lacks the extended temperature rating or the firmware features such as power-immunity, ECC and wear-levelling that prevent silent data loss in harsh environments.

Suited for embedded engineers, not consumer media

Engineers building dash-cams, telemetry loggers or outdoor sensors that must survive -40 °C to 85 °C will benefit from the health-status meter, programmable ID and host-lock features. Buyers who only need casual photo storage or a single card for a phone should consider standard consumer microSD lines instead.

Kohokohdat

  • Industrial-grade MLC withstands extreme environments
  • Up to 384 TB written for long-term logging
  • 80 MB/s read and 50 MB/s write capture data fast
  • Advanced firmware protects against power loss and bit errors
  • 25-pack simplifies deployment across multiple devices

Tekniset tiedot

BrandSanDisk
Card typeMicroSD
SeriesIndustrial Wide Temp IX QD332
ModelSDSDQAF3-016G-I
TypemicroSDHC
Capacity16GB
Speed Class RatingU1
Read SpeedUp to 80MB/s
Write SpeedUp to 50MB/s
Option25-Pack

Tämän mallin muut versiot

4 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I verify the 80MB/s read and 50MB/s write speeds are performing correctly after installation?

Run a benchmark tool such as CrystalDiskMark or ATTO Disk Benchmark against the card and compare the sequential read and write results to the rated 80MB/s read and 50MB/s write figures.

What comes in the 25-pack and is any adapter or reader included?

The pack contains 25 SanDisk Industrial microSDHC 16GB U1 cards (model SDSDQAF3-016G-I); no SD adapter or USB reader is supplied, so purchase those separately if your device lacks a microSD slot.

Should I choose the 16GB U1 version or a different capacity for high-endurance logging?

This 16GB U1 model is rated for up to 384 terabytes written and operates from -40°C to 85°C, making it suited for intensive logging; select a higher capacity only if you need more storage per card.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.