Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 2.5 inch SAS hard drive with circuit board visible

Seagate

Seagate ST2400MM0159 2.4TB 10K 2.5" 12Gb/s SAS internal hard drive

SKU CH-7YS7-BFFST MPN ST2400MM0159

A 2.4 TB 10K RPM SAS drive in a 2.5 inch form factor for high-performance storage

  • 4 TB capacity supports large enterprise datasets
  • 10 K RPM spindle speed reduces data access latency
  • 12 Gb/s SAS interface enables high-throughput server connectivity
  • 5 inch form factor fits dense drive bays
  • New condition ensures full manufacturer specification compliance

2.4 TB 10K SAS drive for enterprise servers

This 2.5 inch Seagate hard drive delivers 2.4 TB of capacity and spins at 10K RPM over a 12 Gb/s SAS interface. It is built for enterprise servers and storage arrays that require high-throughput block access. The drive tray is not included so installers must supply their own carrier.

No tray or software alters the base specification

The product ships as a bare drive without a mounting tray, cables or management utilities. Retail or OEM packaging may vary but no accessories change the drive’s native performance or connectivity. Integration depends entirely on the host backplane and controller.

12 Gb/s SAS link sets the throughput ceiling

The 12 Gb/s SAS interface defines the maximum sustained transfer rate the drive can present to the controller. Actual throughput will be lower due to protocol overhead, rotational latency and the mechanical limits of the 10K RPM platters. Systems without a 12 Gb/s SAS host bus adapter cannot reach the rated interface speed.

Helstu kostir

  • 4 TB capacity supports large enterprise datasets
  • 10 K RPM spindle speed reduces data access latency
  • 12 Gb/s SAS interface enables high-throughput server connectivity
  • 5 inch form factor fits dense drive bays
  • New condition ensures full manufacturer specification compliance

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

How often should the 10K RPM spindle bearings be checked or replaced?

Enterprise drives like this 2.4 TB SAS model are rated for continuous operation; bearing service is not a scheduled maintenance item under normal use.

What limits sustained write throughput on the 12 Gb/s SAS interface?

The 10K RPM mechanical speed and 2.5" platter geometry set the sustained transfer ceiling well below the 12 Gb/s link rate.

How much heat does the 2.4 TB drive add to a server chassis running all day?

Typical idle power is low single-digit watts; under constant 10K RPM seeks the drive draws modest power and needs normal airflow.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.