Seagate
Seagate ST2400MM0159 2.4TB 10K 2.5" 12Gb/s SAS internal hard drive
A 2.4 TB 10K RPM SAS drive in a 2.5 inch form factor for high-performance storage
- 4 TB capacity supports large enterprise datasets
- 10 K RPM spindle speed reduces data access latency
- 12 Gb/s SAS interface enables high-throughput server connectivity
- 5 inch form factor fits dense drive bays
- New condition ensures full manufacturer specification compliance
2.4 TB 10K SAS drive for enterprise servers
This 2.5 inch Seagate hard drive delivers 2.4 TB of capacity and spins at 10K RPM over a 12 Gb/s SAS interface. It is built for enterprise servers and storage arrays that require high-throughput block access. The drive tray is not included so installers must supply their own carrier.
No tray or software alters the base specification
The product ships as a bare drive without a mounting tray, cables or management utilities. Retail or OEM packaging may vary but no accessories change the drive’s native performance or connectivity. Integration depends entirely on the host backplane and controller.
12 Gb/s SAS link sets the throughput ceiling
The 12 Gb/s SAS interface defines the maximum sustained transfer rate the drive can present to the controller. Actual throughput will be lower due to protocol overhead, rotational latency and the mechanical limits of the 10K RPM platters. Systems without a 12 Gb/s SAS host bus adapter cannot reach the rated interface speed.
商品特色
- 4 TB capacity supports large enterprise datasets
- 10 K RPM spindle speed reduces data access latency
- 12 Gb/s SAS interface enables high-throughput server connectivity
- 5 inch form factor fits dense drive bays
- New condition ensures full manufacturer specification compliance
商品規格
本商品目前尚未公佈規格。
商品問答
How often should the 10K RPM spindle bearings be checked or replaced?
Enterprise drives like this 2.4 TB SAS model are rated for continuous operation; bearing service is not a scheduled maintenance item under normal use.
What limits sustained write throughput on the 12 Gb/s SAS interface?
The 10K RPM mechanical speed and 2.5" platter geometry set the sustained transfer ceiling well below the 12 Gb/s link rate.
How much heat does the 2.4 TB drive add to a server chassis running all day?
Typical idle power is low single-digit watts; under constant 10K RPM seeks the drive draws modest power and needs normal airflow.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
