Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

Seagate

Seagate ST9300605SS 300GB 10K RPM 6Gbps 2.5" SAS internal hard drive

SKU CH-5566-YP27Q

2.5-inch SAS hard drive delivers 300 GB capacity, 10 000 RPM speed and 64 MB cache for enterprise workloads

  • 300GB capacity stores enterprise datasets
  • 10000RPM spindle delivers fast transactional throughput
  • 64MB cache buffers burst I/O workloads
  • 6Gbps SAS interface connects to compatible controllers
  • 5-inch form factor fits dense server bays

SAS enterprise drive

The Seagate SAVVIO ST9300605SS is a 300GB 2.5-inch internal hard drive built for SAS environments. It spins at 10000RPM and provides a 6Gb/s interface with a 64MB buffer. The unit is supplied new with zero hours recorded.

Servers and arrays needing 2.5-inch SAS

This drive suits installations that require a 2.5-inch form factor and a 6Gb/s SAS connection. It is not for systems that only accept 3.5-inch bays or that lack a SAS host bus adapter. Buyers needing larger capacities should consider other models.

6Gb/s SAS interface

The single specification that decides fit is the 6Gb/s SAS interface. The drive will only operate when connected to a compatible SAS controller or backplane that supports this signalling rate.

Helstu kostir

  • 300GB capacity stores enterprise datasets
  • 10000RPM spindle delivers fast transactional throughput
  • 64MB cache buffers burst I/O workloads
  • 6Gbps SAS interface connects to compatible controllers
  • 5-inch form factor fits dense server bays

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

Will the 2.5" SAS 6Gb/s interface on this ST9300605SS work with my existing 3Gbps SAS backplane?

Yes, the SAS 6Gb/s interface is backward compatible with 3Gbps SAS controllers and backplanes, though the drive will operate at the lower 3Gbps link speed.

How can I verify the 10000RPM spindle speed and 64MB cache are active after installation?

Check the drive’s reported rotational speed and cache size in your RAID controller BIOS, SAS HBA utility, or operating-system disk information tools such as smartctl or Device Manager.

Does the ST9300605SS ship with a mounting bracket, cables or tray, or must I source them separately?

The drive is supplied as a bare 2.5" SAS unit; any 2.5" to 3.5" adapter bracket, SAS data/power cables or hot-swap tray must be purchased separately.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.