Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Silver 2.5 inch SAS hard drive with green circuit board visible

Seagate

Seagate ST9300605SS 300GB 10K RPM 6Gbps 2.5" SAS internal hard drive

SKU CH-5566-YP27Q

2.5-inch SAS hard drive delivers 300 GB capacity, 10 000 RPM speed and 64 MB cache for enterprise workloads

  • 300GB capacity stores enterprise datasets
  • 10000RPM spindle delivers fast transactional throughput
  • 64MB cache buffers burst I/O workloads
  • 6Gbps SAS interface connects to compatible controllers
  • 5-inch form factor fits dense server bays

SAS enterprise drive

The Seagate SAVVIO ST9300605SS is a 300GB 2.5-inch internal hard drive built for SAS environments. It spins at 10000RPM and provides a 6Gb/s interface with a 64MB buffer. The unit is supplied new with zero hours recorded.

Servers and arrays needing 2.5-inch SAS

This drive suits installations that require a 2.5-inch form factor and a 6Gb/s SAS connection. It is not for systems that only accept 3.5-inch bays or that lack a SAS host bus adapter. Buyers needing larger capacities should consider other models.

6Gb/s SAS interface

The single specification that decides fit is the 6Gb/s SAS interface. The drive will only operate when connected to a compatible SAS controller or backplane that supports this signalling rate.

Pluspunten

  • 300GB capacity stores enterprise datasets
  • 10000RPM spindle delivers fast transactional throughput
  • 64MB cache buffers burst I/O workloads
  • 6Gbps SAS interface connects to compatible controllers
  • 5-inch form factor fits dense server bays

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

Will the 2.5" SAS 6Gb/s interface on this ST9300605SS work with my existing 3Gbps SAS backplane?

Yes, the SAS 6Gb/s interface is backward compatible with 3Gbps SAS controllers and backplanes, though the drive will operate at the lower 3Gbps link speed.

How can I verify the 10000RPM spindle speed and 64MB cache are active after installation?

Check the drive’s reported rotational speed and cache size in your RAID controller BIOS, SAS HBA utility, or operating-system disk information tools such as smartctl or Device Manager.

Does the ST9300605SS ship with a mounting bracket, cables or tray, or must I source them separately?

The drive is supplied as a bare 2.5" SAS unit; any 2.5" to 3.5" adapter bracket, SAS data/power cables or hot-swap tray must be purchased separately.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.