Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 120mm case fan with air-channeling grille and ARGB lighting

Silverstone Technology

Silverstone Technology AP120SKB-ARGB 120mm case fan

SKU CH-2GYZ-T01WH MPN AP120SKB-ARGB

120 mm case fan channels airflow up to 1.5 m with 51.32 CFM at 2000 RPM and 33.5 dBA, using fluid-dynamic bearings and ARGB daisy-chain cabling

  • Fan Counts1 Fan
  • TypeCase Fan
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeFluid Dynamic
  • RPM2000 RPM
  • Focused airflow reaches 1.5 m with air-channeling grille
  • Shark Force blade design lowers noise to 33.5 dBA
  • PWM control spans 0 to 2000 RPM for flexible cooling
  • Daisy-chain modular cables simplify ARGB sync and cable routing
  • Fluid Dynamic Bearing and 51.32 CFM airflow ensure long-life performance

120mm ARGB case fan for focused airflow

The SilverStone Air Penetrator 120SK ARGB is a single 120mm case fan built around a distinctive Shark Force blade design and an integrated air channeling grille. It targets builders who want concentrated airflow reach and addressable RGB lighting in a standard 25mm thickness. The fluid dynamic bearing supports long life expectancy across the full speed range.

PWM control and standard ARGB connector limits

Speed is adjustable from 0 to 2000 RPM via the 4-pin PWM connector, delivering up to 51.32 CFM at 33.5 dBA. The ARGB lighting requires a 4-1 pin addressable RGB header or a separate controller; it will not work on a standard 12V RGB header. The modular daisy-chain cabling reduces routing clutter but adds cable length that must fit behind the motherboard tray.

Check clearance and header availability before

Verify that your case accepts 120mm fans at 25mm thick and that the grille profile does not interfere with side panels or radiator mounts. Confirm your motherboard has a spare 5V ARGB header or that you own a compatible ARGB controller. Builders needing slim fans under 25mm or non-ARGB operation should look elsewhere.

Helstu kostir

  • Focused airflow reaches 1.5 m with air-channeling grille
  • Shark Force blade design lowers noise to 33.5 dBA
  • PWM control spans 0 to 2000 RPM for flexible cooling
  • Daisy-chain modular cables simplify ARGB sync and cable routing
  • Fluid Dynamic Bearing and 51.32 CFM airflow ensure long-life performance

Tæknilýsing

BrandSilverStone
ModelAir Penetrator 120SK ARGB
Fan Counts1 Fan
TypeCase Fan
Fan Size120mm
Fan Thickness25mm
Bearing TypeFluid Dynamic
RPM2000 RPM
Air Flow51.32 CFM
Noise Level33.5 dBA
Power Connector4 Pin
ColorBlack
LEDARGB
Sendingarþyngd2.27 kg
Stærð sendingar127 × 127 × 127 mm

Spurningar um þessa vöru

Should I pick the 120mm version or a different size?

This model is only offered as a 120mm fan with 25mm thickness, so there is no alternative size to choose.

What does the 51.32 CFM airflow figure deliver inside a case?

The integrated air channeling grille focuses the airflow into a tight column that reaches 1.5m, eliminating dead spots and pushing air through restrictive heatsinks or radiators more effectively than a standard fan.

How does the 4-pin PWM and ARGB connector work in practice?

The 4-pin PWM header lets the motherboard vary speed from 0 to 2000 RPM, while the industry-standard 4-1 pin ARGB connector syncs lighting with any compatible motherboard or controller using a single daisy-chain cable.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.