Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Silverstone Technology
120 mm case fan channels airflow up to 1.5 m with 51.32 CFM at 2000 RPM and 33.5 dBA, using fluid-dynamic bearings and ARGB daisy-chain cabling
The SilverStone Air Penetrator 120SK ARGB is a single 120mm case fan built around a distinctive Shark Force blade design and an integrated air channeling grille. It targets builders who want concentrated airflow reach and addressable RGB lighting in a standard 25mm thickness. The fluid dynamic bearing supports long life expectancy across the full speed range.
Speed is adjustable from 0 to 2000 RPM via the 4-pin PWM connector, delivering up to 51.32 CFM at 33.5 dBA. The ARGB lighting requires a 4-1 pin addressable RGB header or a separate controller; it will not work on a standard 12V RGB header. The modular daisy-chain cabling reduces routing clutter but adds cable length that must fit behind the motherboard tray.
Verify that your case accepts 120mm fans at 25mm thick and that the grille profile does not interfere with side panels or radiator mounts. Confirm your motherboard has a spare 5V ARGB header or that you own a compatible ARGB controller. Builders needing slim fans under 25mm or non-ARGB operation should look elsewhere.
| Brand | SilverStone |
|---|---|
| Model | Air Penetrator 120SK ARGB |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Fluid Dynamic |
| RPM | 2000 RPM |
| Air Flow | 51.32 CFM |
| Noise Level | 33.5 dBA |
| Power Connector | 4 Pin |
| Color | Black |
| LED | ARGB |
| وزن الشحنة | 2.27 kg |
| أبعاد الطرد | 127 × 127 × 127 mm |
This model is only offered as a 120mm fan with 25mm thickness, so there is no alternative size to choose.
The integrated air channeling grille focuses the airflow into a tight column that reaches 1.5m, eliminating dead spots and pushing air through restrictive heatsinks or radiators more effectively than a standard fan.
The 4-pin PWM header lets the motherboard vary speed from 0 to 2000 RPM, while the industry-standard 4-1 pin ARGB connector syncs lighting with any compatible motherboard or controller using a single daisy-chain cable.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟